Shoes

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

Whether it's a sweltering climb at the Vuelta or a toasty afternoon in your hometown, we developed the S-Works 7 Vent to keep you comfortable on even the hottest days. With new features like the Vented Mouthport toe box and an all-new engineered mesh upper, the S-Works 7 Vent delivers exceptional ventilation and aides in sweat evaporation. Pair that with World-Tour-proven features like our Body Geometry Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button, the PadLock heel, a FACT Powerline carbon outsole, and machined alloy BOA S3-Snap dials, and you're set for any ride or race, no matter how high the mercury rises. For power transfer, our PadLock heel construction cradles the heel to ensure optimal power transfer. In fact, its been scientifically-proven to improve acceleration. Pair that with two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee, and you can fine-tune your level of foot-hold on-the-fly. The Vented Mouthport toe box pulls air in through the front of the shoe and channels it around your feet, while the entirely-new, engineered mesh upper and tongue let that air flow freely throughout the shoe, aiding in both cooling and sweat evaporation. Along with the engineered mesh in the upper, we added a layer of Dyneema Mesh to keep strong hold of your foot, ensuring pro-proven power transfer. The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry Features, Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Non-slip, replaceable heel tread with internally recessed screws for security. - Three-bolt cleat pattern fits all major road pedals. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Uses the same 66-gram FACT Powerline carbon outsole found in our EXOS line. With its mesh-covered ventilation holes, the sole furthers the shoe's cooling properties, all while dropping weight to 233 grams (1/2 pair, Size 42).

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongue-less sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

At a mere 150 grams, the S-Works EXOS are the lightest cycling shoes to ever come with a Boa® dial. And not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’re still at that World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer, we implemented all the engineering bells and whistles we could think of. And when that wasn’t enough, we thought up some more. The carbon outsole was developed using an advanced form of Finite Element Analysis and pressure mapping to pull out material where it wasn’t needed. This allowed us to keep crazy-high stiffness numbers, too. For the uppers, we completely removed the heel counter. And with a little help from the space-grade Dyneema® mesh and some CubicTec reinforcement, the heel molds to the back of your foot, so nary a watt is wasted. Lastly, we developed a new Warp Sleeve vamp that let us get rid of the toe box, and this further cut down the weight and increased the comfort. Of course we couldn't do any of the above without including our coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but to also increase efficiency and to reduce the risk of injury. The S-Works EXOS are the lightest cycling shoes to ever have a Boa® dial—experience the feeling of lightness. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 - A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - BOA IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, and speed. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 140g (1/2 pair, Size 42)

Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With all of these features combined, you can be sure that we've kept in line with the motto "every watt is sacred." In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)

Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn’t stretch when pulled on, making sure that your foot stays where it’s supposed to. With all of these features combined, you can be sure that we’ve kept in line with the motto “every watt is sacred.” In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC’d alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)

A few notes on this shoe -- This product combines our SW Vent upper with our race winning SW Recon outsole to create a one-of-a-kind shoe perfect for long hot days in the saddle. We see this product as the ultimate gravel racing product for hot summer races. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - The Vented Mouthport toe box pulls air in through the front of the shoe and channels it around your feet, while the entire-new, engineered mesh upper and tongue let that air flow freely throughout the shoe—aiding in both cooling and sweat evaporation. Along with the engineered mesh in the upper, we added a layer of Dyneema Mesh to keep strong-hold of your foot, ensuring pro-proven power transfer. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - For power transfer, our PadLock heel construction cradles the heel to ensure optimal power transfer. In fact, it’s been scientifically-proven to improve acceleration. Pair that with two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee, and you can fine-tune your level of foot-hold on-the-fly. - Two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee so you can fine-tune your level of foot-hold on-the-fly. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals.

Make no compromises Simply our fastest, most advanced mountain shoe ever. The XXX mountain bike shoe was designed for those that demand the most of themselves and their equipment. It's the exceedingly light, stiff, zero-compromises trail shoe for XC and CXC racers that value efficiency, minimal weight and maximum stiffness. Product details - inForm Pro last delivers an ergonomically optimized, high-performance fit - 100% OCLV carbon sole is extremely lightweight and stiff for efficient power transfer - Dual, independent Boa IP1 dials for precise, zone-specific fit adjustments - Lightweight and luxurious TPU upper material for supportive comfort and perfect perforation pattern for breathability - Stiffness index 14 of 14 - Asymmetrical design and superior lace routing system reduces top-of-foot pressure while providing a more secure fit - External heel cups and no-slip heel lining prevent slippage and chafing while reacting to your movements more quickly - Durable GnardGuard outer material protects against abrasion and fights debris

Ride what the pros ride The most sophisticated road cycling shoe on the planet. XXX is professional grade from heel to toe. It's meticulously constructed of the most luxurious materials available, and renowned for its tailored fit and unparalleled pedaling efficiency. This attention to detail has made XXX one of the most sought after race shoes by the world's best riders. Product details - inForm Pro last delivers an ergonomically optimized, high-performance fit - 100% OCLV carbon sole is extremely lightweight and stiff for efficient power transfer - Dual, independent Boa IP1 dials for precise, zone-specific fit adjustments - Lightweight and luxurious TPU upper material for supportive comfort and perfect perforation pattern for breathability - Stiffness index 14 of 14 - Asymmetrical design and superior lace routing system reduces top-of-foot pressure while providing a more secure fit - External heel cups and no-slip heel lining prevent slippage and chafing while reacting to your movements more quickly - Neoprene pads at top of the tongue reduce pressure against dorsal tendon for better mobility

A pro-level cycling shoe with a Microtex upper, full unidirectional carbon outsole (R2) and Li2 Dual Zone Boa® Fit System configuration. The latest refinement of our legendary performance road racing cycling shoe, developed with and chosen by leading athletes throughout the pro peloton. - Microtex upper - Li2 Dual Zone BOA Fit System configuration - R2 carbon outsole: full carbon unidirectional, stiffness index 10 - Weight: 227g (size 42 - 1/2 pair) - Sizes: 36-48 (37 to 47 also in half sizes) - Vento: performance racing series designed in collaboration with professional cyclists - Intended use: road racing

Vento Powerstrap R2 Aeroweave is a pure racing shoe: the lightest and most breathable model in the fizik performance range, engineered with an innovative high tenacity net-like structure which is coupled with our stiffest carbon sole. The pursuit of reducing weight and increasing ventilation, while maintaining support and protection led our designers and engineers to the development of a new material used in the upper. Called Aeroweave, it's an advanced woven fabric that interlaces lightweight nylon fibers with filaments of thermoplastic polymer. This blend of threads creates a material with an open, net-like pattern that is extremely airy, yet highly resistant and resilient. The Vento Powerstrap R2 Aeroweave's upper is so intensely vented that the riders' socks are visible through it. Aeroweave is a malleable material and moves to effectively cradle the foot, but its tenacity delivers the support and containment required for a high-performance racing shoe. The Aeroweave upper is complemented by Powerstrap, fizik's innovative Velcro closure designed for an enveloping fit. While most traditional Velcro closures just pull together two sides of the shoe's upper, in the Vento Powerstrap configuration a ribbon wraps around the foot, providing secure containment using just two straps. The instep and the midfoot are separately adjustable for customized fit and compression. These straps have been streamlined to make them even lighter and stronger. Vento Powerstrap R2 Aeroweave also features a whole new outsole: the R2 outsole's engineered carbon-fiber layup saves weight and delivers increased stiffness. With an index of 10, the R2 is the stiffest outsole in the fizik range. A wide vent inlet and deep internal channeling provide a cooling airflow, contributing to temperature management. The cleat positioning is slightly further rear-wards compared to traditional settings, to optimize pedaling efficiency and reduce knee compression, especially well suited to very aggressive, forward aero positions. - Aeroweave: extremely breathable, high-tenacity net-like upper structure - Powerstrap: foot-wrapping Velcro closure designed for an enveloping fit - R2 carbon outsole: optimized cleat positioning, high stiffness, and lightness tuned for power transfer - Weight: 205g (size 42 - 1/2 pair)

The new S-Works 7 Lace takes the performance of the winningest road shoe in the world and combines it with laces to create one of our most supple and adaptable uppers for next-level fit. Paired with our Body Geometry technology for optimum foot, knee, and ankle alignment, going fast never looked so good. By utilizing laces, the shoe offers 12 separate points of tension adjustment to dial in the perfect hold across the entire foot, while the removal of plastic hardware allows the engineered mesh upper to adapt to more foot shapes for a sublime, supple fit. The S-Works 7 Lace fits like a leather glove, but you know, for your foot and made of engineered mesh and carbon. But laces have more to bring to the party. The removal of plastic hardware also shaves considerable weight. One size 44 S-Works 7 Lace weighs a feathery 236 grams, so you’ll be looking good and feeling good when the road points uphill. The foundation for all this is the technology pioneered for the S-Works 7. Our Powerline carbon outsole—our lightest and stiffest outsole ever—creates the ideal platform for power delivery. Our PadLock heel comfortably holds the rear of your foot, while the engineered mesh upper delivers a stable yet supple hold for all-day power delivery. Whether you’re looking for a relaxed coffee ride shoe, a lightweight climber, or a supple and adaptive fit that compliments your race shoe, the S-Works 7 Lace marries classic style to race-winning heritage and performance. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Non-stretch laces provide even hold across the entire foot that stays consistent all ride long. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0. - Engineered mesh is combined with no-stretch TPU zones for the ultimate connection and comfort. - PadLock™ heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximately 236g per shoe (size 44)

On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, “What shoes are those?” - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.

On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?" - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.

With excellent adaptable fit, proven comfort, great looks and highly efficient power transfer, the Aria R3 road cycling shoe delivers premium performance. The Aria R3 will fit almost any road-rider’s foot thanks to the Enhanced Volume Control which uses two micro-adjustable Boa IP1-B dials running strong, light steel-coated nylon laces and lightweight plastic lace guides. The closure system draws the pliable yet protective Microtex upper around the foot to fit snugly with no seam-rub or pressure points. Laser Perforated and 1.2mm thick, it’s ideal for the all-season blend of light weight, breathability and flexibility, strength and support. A superb range of distinctive new colorways include the unique combination of a shiny/opaque combination material. Aria R3’s Uni Direction Full Carbon Outsole is lightweight and laterally stiff for ultimate power transfer, while the discreet toe stud and removable double heel-stud provide purchase when off the bike. It features an advanced ventilation system for rider comfort and peak performance whatever your ride, and works with the fi'zi:k Cycling Insole’s subtly cushioned structure and supportive heel-cup. - Materials: Microtex Laser Perforated - Outsole: UD Carbon Fiber - Closure system: Double Boa IP1-B Dials - Insole: fi'zi:k cycling Insole - Weight: 243g (size 42.5)

In the heat of competition, you want a shoe that maximizes comfort and efficiency during the bike leg, while also helping you get in and out of transition as fast as possible. The new Trivent SC addresses all those needs, with performance-enhancing, tri-specific features, plus Body Geometry ergonomics for true comfort and great fit. Its stiff Body Geometry sole and footbed delivers superb efficiency and power transfer, while the looped heel with pull tab and wide entry/exit closure minimizes time in the transition area. Our pro triathletes demanded ultimate ventilation and faster transitions—you get to reap the rewards. Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT Powerline carbon/composite sole for light, stiff power transfer: Stiffness Index 10.0. - Thermobonded construction for a smooth internal lining for "sockless" fit and comfort. - Large, looped heel pull keeps tab accessible for easy shoe changes in transitions. - Debossed fold lines allow for easy shoe flattening for flying starts. - Supple upper with open-air mesh for maximum ventilation. - Three-bolt cleat pattern fits all major road pedals. - Wide closure system allows for easy entry/exit and disperses forces through the shoe for a comfortable and secure fit. - Rubberized heel for increased traction during transitions. - Approximate weight: 242g (1/2 pair, size: 42)

The all-new Union BOA® Shoes are set to take your mountain bike adventures to new, more adjustable, and sendier levels of "yew!" Get more power to the pedal and customize your fit to perfection with the dual BOA® Li2 system featured in these trail-ready shoes. Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union BOA® Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Clipless mountain bike shoes with Boa® - Dual Boa® Li2 system secure, on-the-fly adjustability - Ultratac™ outsole balances grip and durability - Reinforced toe for protection against rock strikes

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon—power transfer, comfort, light weight, style—in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pavé-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you’re flying up a run-up on the ‘cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we’ve given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track and even more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa® S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa® S2-SV Snap Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

The 2FO Cliplite puts precision fit at your toe tips, providing unparalleled pedal input for on-trail control. The micro-adjustable BOA® Li2 dials combined with a welded upper provide a ridiculously comfortable fit. Built on a cushioned EVA foam midsole and relaxed fit last, the 2FO Cliplite keeps you locked in and cooled down for all-day riding without sacrificing off-the-bike comfort and style. The shoe rides on our SlipNot™ FG rubber sole delivering best-in-class pedal grip and connection when hitting full send. The 2FO Cliplite is perfectly adjusted for all-out trail speed. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Welded upper protects and holds the foot to protect and ventilate while tackling gnarly terrain. - Independent BOA® Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa® guarantee. - Lollipop™ nylon shank is paired with an EVA midsole to flex where needed while remaining stiff for pedaling. - Micro-perforated synthetic provides a soft and supple feel without sacrificing protection and durability. - XPEL™ hydrophobic lining provides cushioning and doesn't retain water. - Two-bolt cleat pattern fits all major mountain pedals. - Landing Strip™ cleat pocket guides the cleat into the pedal for insanely fast engagement. - Approximate weight: 424g (1/2 pair, Size 44)

The 2FO Cliplite puts precision fit at your toe tips, providing unparalleled pedal input for on-trail control. The micro-adjustable BOA Li2 dials combined with a welded upper provide a ridiculously comfortable fit. Built on a cushioned EVA foam midsole and relaxed fit last, the 2FO Cliplite keeps you locked in and cooled down for all-day riding without sacrificing off-the-bike comfort and style. The shoe rides on our SlipNot FG rubber sole delivering best-in-class pedal grip and connection when hitting full send. The 2FO Cliplite is perfectly adjusted for all-out trail speed. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Welded upper protects and holds the foot to protect and ventilate while tackling gnarly terrain. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa guarantee. - Lollipop nylon shank is paired with an EVA midsole to flex where needed while remaining stiff for pedaling. - Micro-perforated synthetic provides a soft and supple feel without sacrificing protection and durability. - XPEL hydrophobic lining provides cushioning and doesn't retain water. - Two-bolt cleat pattern fits all major mountain pedals. - Landing Strip cleat pocket guides the cleat into the pedal for insanely fast engagement. - Approximate weight: 424g (1/2 pair, Size 44)

A hikeable, clip-in compatible cycling shoe that will traverse any terrain and whatever comes after bikes are put away. Bontrager Avert is a lace-up bike shoe that can walk into whatever #GoByBike adventure you find—even after the bikes are put away. It's clip-in compatible and perfect for on- and off-bike escapes, from daily rides to multi-day tours and even hikes. And it's built with durable materials for lasting wear, a cushioned EVA midsole for all day comfort, and reverse lug traction for grip when you need it most. Product details - Durable, weather resistant, and breathable CORDURA® and suede upper construction for all-day, everyday use - High-traction reverse lug outsole can easily traverse any terrain you come across - Shock-absorbing EVA midsole for all day comfort - Classic lace closure system with convenient elastic lace keeper - Compatible with 2-bolt SPD-style cleats - Slip-on construction makes it easy to get on and off and assures the tongue never slides to one side

You owe it to yourself Get the road shoe that checks all the boxes for the committed female road cyclist. Velocis is designed for the road bike rider that needs one pair of cycling shoes to give them more of what they want. The Boa System provides a perfect fit that locks in power through every pedal stroke. If you're not careful, sponsors may come calling. - inForm Pro last delivers an ergonomically optimized, high-performance fit - Silver Series carbon/fiberglass composite sole for added stiffness - Boa IP1 dial for precise, two-way adjustment - Stiffness index 10 of 14 - Perforated synthetic uppers allow increased breathability and comfort - Women Specific Design is engineered specifically to yield better fit and greater comfort for women

Get the road shoe that checks all the boxes for the committed road cyclist. Velocis is designed for the road bike rider that needs one pair of cycling shoes to give them more of what they want. The Boa System provides a perfect fit that locks in power through every pedal stroke. If you're not careful, sponsors may come calling. Key features - inForm Pro last delivers an ergonomically optimized, high-performance fit - Silver Series carbon/fiberglass composite sole for added stiffness - Boa IP1 dial for precise, two-way adjustment - Stiffness index 10 of 14 - Perforated synthetic uppers allow increased breathability and comfort - Sole Fiber Content: Carbon Composite - Liner Fiber Content: Shell: 100% Polyester, Lining: 100% Polyester

Get the road shoe that checks all the boxes for the committed road cyclist. Velocis is designed for the road bike rider that needs one pair of cycling shoes to give them more of what they want. The Boa System provides a perfect fit that locks in power through every pedal stroke. If you're not careful, sponsors may come calling. Key features - inForm Pro last delivers an ergonomically optimized, high-performance fit - Silver Series carbon/fiberglass composite sole for added stiffness - Boa IP1 dial for precise, two-way adjustment - Stiffness index 10 of 14 - Perforated synthetic uppers allow increased breathability and comfort - Sole Fiber Content: Carbon Composite - Liner Fiber Content: Shell: 100% Polyester, Lining: 100% Polyester