Filter By:
Cables
$42.00
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease
$27.00
Shimano Stainless Road/MTB Brake Cable & Housing Sets
- 1 x 2000mm black 5mm housing
- 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables
- 2 end caps and 2 cable crimps
$38.00
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation.
Includes:
- 1400mm x 5mm housing x 1
- 800mm x 5mm housing x 1
- 2050mm x 1.6mm cable x 1
- 1000mm x 1.6mm cable x 1
$46.00
Shimano XTR OT-SP41 Polymer Coated Derailleur Cable Sets
$49.00
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes.
$3.00
- Hydraulic Disc Brake Hose Fitting Kit
- Includes 50 threaded hosebarbs, 50 red comp fittings, 1 T8 Torx
- Compatible with Stealthamajig and standard levers
$17.99
Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable.
- Length: 60 – 65mm
- Black
$4.50
The Slic-Kable features a low friction inner wire for smooth braking.
- 65-inch length
$11.00
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips.
- Aluminum model accepts lines up to 5mm in diameter and the lines snap in.
- Stainless model grips fully around the lines and is adjustable to fit most diameters.
$2.00
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
$4.49
Jagwire's flexible shift housing is used for the rear housing segment with Shimano Shadow-type road rear derailleurs to give optimum shifting performance and the flexibility needed for wheel installation and removal.
- For use with Shimano Shadow type road rear derailleurs, such as RD-R9100, RD-R8000, and RD-R7000.
- 4mm low-compression CGX-SL housing construction.
- Includes 10x sealed end caps and 10x 4mm/4mm housing connectors
$11.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance.
Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance.
- Polished stainless steel construction for low friction
- Compatible with all performance housing and lubricants
- Cables are tinted gold for easy identification
$7.50
Rotating S-hooks securely hold housing segments together and prevent undue noise and migration.
- Two halves rotate 360 degrees
- Connects 4mm or 5mm housing to electronic shift wire
$14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$0.60
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$2.00
Hose fittings for Hayes hydraulic disc brakes available a la carte.
Hayes brake compatibility:
- HFX-9
- Prime
- Sole
- El Camino
- Radar
$27.99
Shimano EW-SD300 Di2 eTube Wire for external routing is available in a variety of lengths.
- Compact design makes new electric components smaller and lighter
- EP8 EP800 Series
$18.00
- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability
- Compatible with Shimano/SRAM road and MTB shifters
- Pre-stretched for more responsive braking
- 1.1mm x 2300mm
$17.00
- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability
- Double ended for Shimano/SRAM road and MTB brake levers
- Pre-stretched for more responsive braking
- 1.5mm x 1700mm
$53.00
- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability
- Compressionless linear strand housing with slick lube liner for reduced friction
- Lightweight sealed alloy end caps and alloy cable tips
- Compatible with Shimano/SRAM road and MTB shifters
Contents:
- 1x - 1.1mm x 1500mm cable
- 1x - 1.1mm x 2300mm cable
- 2.7m - Compression-less 4mm housing
- 8x - Black sealed alloy end caps
- 2x - Black dirt guard alloy end caps w/ rubber boots
- 2x - Black alloy cable tips
- 2x - Black rubber cable donuts
- 2x - Black rotating hooks
$53.00
- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability
- Kevlar reinforced compressionless linear strand housing with slick lube liner improves lever feel
- Lightweight alloy end caps and cable tips
- Compatible with Shimano/SRAM road and MTB brake levers
Contents:
- 1x - 1.5mm x 1350mm cable
- 1x - 1.5mm x 2350mm cable
- 3m - Compression-less 5mm housing
- 2x - EZ-bend housing segments
- 6x - Black alloy end caps
- 2x - Black alloy end caps for small frame fittings
- 2x - Black alloy cable tips
- 2x - Black rubber cable donuts
- 2x - Black rotating hooks
Page 1 of 1