Skip to main content
Tune Ups, Maintenance, & Service

Tune Ups, Maintenance, & Service

Turn the clock back on your bike by keeping up on regular maintenance. We service all brands and all styles of bicycles and can take your trusty-if-a-bit-dusty old friend and make it like new all over. Rates vary by style and scope, so stop in for a fully detailed estimate.

**All prices listed below are for labor only. Parts are additional, unless otherwise noted.


NEW: Use the Service Appointment Scheduler to  schedule a time to drop off your bike.  We'll assess what needs to be done and give you an estimate on cost as well as when we can complete the needed repairs or tune up.

You can also just come in during regular business hours ( M-F 10AM - 7PM & Sat 10AM - 5PM) to drop your bike off.
Have a question? Call us at (781) 447-7223 to discuss your repair.

Service Appointment Scheduler

Basic Tune Up


The usual adjustments on most bikes.

  1. Adjust hubs
  2. True wheels and check spoke tension
  3. Adjust headset
  4. Check bottom bracket - adjust if possible
  5. Adjust cable-actuated brakes or align calipers & rotors on hydraulic discs
  6. Inspect drivetrain parts for wear
  7. Adjust shifting, including rear derailleur hanger alignment
  8. Check hardware for proper torque
  9. Wipe down frame

Detail Tune Up


All the Basic Tune Up stuff, PLUS:

  1. Drivetrain cleaning, including labor for chain, cassette, and/or chainring replacements (parts are additional)
  2. Cable replacement labor (cables and housing are additional)
  3. Handlebar wrapping labor (handlebar wrap is additional) 
  4. Thorough bike cleaning

Safety Check Up


Get a detailed report of the shape your bike is in

  1. Full inspection with recommendations for maintenance points
  2. Printed record you can submit to group rides that may require pre-event inspection or just to review for your own peace of mind


$329 - $429

Do all the things!

  1. The bike is disassembled down to the bare frame
  2. Each component is individually cleaned and inspected
  3. Loose bearings are repacked with fresh grease (cartridge bearings can be replaced for the cost of bearings - no additional labor charge)
  4. Wheels are retensioned and trued
    The bike is reassembled and fully tuned
  5. New cables, cable housings, and grips/handlebar wrap are included (Specific options are included. Premium upgrades are available at discounted cost)
  6. Overhaul prices vary. Stop in or call so we can better determine your needs.

Other Featured Service Items

30-Hour Fork Service


Bath oil and seals

  1. Remove, clean, and inspect lower casting
  2. Inspect upper tubes
  3. Test fit of glide bushings
  4. Install new external seal-wipers
  5. Reinstall lower casting with fresh bath oil
  6. Seals additional

60-Hour Fork Service


30 hour plus air spring rebuild and open-bath damper service (where applicable)

  1. All service points of the 30 hour service, plus:
  2. Disassemble, clean, and inspect air spring components
  3. Replace air spring seals
  4. Reassemble air spring with proper lubricant
  5. Flush, clean, inspect, and replace o-rings and glide rings on open system dampers
  6. Refill fluid on open system dampers
  7. Externally clean, inspect, and test cartridge type dampers
  8. Seals additional

50-Hour Rear Shock Service


Air can service

  1. Inspect eye bushings and reducers
  2. Inspect valve core
  3. Remove, clean, and inspect air can.
  4. Inspect damper body
  5. Replace air and oil seals and glide rings
  6. Reassemble with proper lubricant
  7. Seals additional

Brake Bleed


Evacuate air and refresh brake fluid

  1. Inspect full system for damage or leaks
  2. Clean and lubricate caliper pistons
  3. Flush old fluid and replace with new
  4. De-gas the system
  5. Clean lever and caliper
  6. Re-install brake pads and align caliper
  • Wheel Build


Professional assembly by one of bikebarn’s master wheelbuilders

  1. Calculate appropriate spoke lengths
  2. Assemble the wheel using various methods, based on the specific wants and needs of the rider
  3. Bring spokes to optimum tension, based on rim manufacturer’s guidelines
  4. Destress the wheel, re-check tension, true, and dish
  5. Provide 30 days of free maintenance touch-ups

Tubeless Setup


For conventional and plus-tire mountain bike wheels (each)

  1. Check tire and rim for compatibility
  2. Tape rim and install valve core
  3. Mount tire and add appropriate sealant
  4. Inflate, set the tire beads, and test for leaks
  5. Cost of tape, valve, and sealant are additional and vary by rim type

Tubeless Setup


For fat bike wheels (each)

  1. Check tire and rim for compatibility
  2. Tape rim and install valve core
  3. Mount tire and add appropriate sealant
  4. Inflate, set tire beads, and test for leaks
  5. Cost of tape, valve, and sealant are additional and vary by rim type

Flat Repair


Installation of replacement inner tube and/or tire (conventional wheel)

  1. Check rim and tire for wear and damage
  2. Check tread for road debris that could cause future punctures
  3. Install new tube and mount tire
  4. Inflate to appropriate pressure
  5. Re-install wheel and check brake adjustment
  6. Cost of tube/tire is additional
  7. Additional labor cost may apply for non-conventional wheels, such as internally geared hubs or other complex installations -- Contact us if you have questions

Full Service Menu

All prices are labor. Parts are additional. 

 Routine Maintenance
Tune Up
Drivetrain Clean
Clean Excessively Dirty Bike Before Service
BMX/Singlespeed Tune Up$59.00
Detail Tune Up$189.00
Safety Check$55.00

Road/Cyclocross/Gravel w/mechanical brakes$329.00
Road/Cyclocross/Gravel w/hydraulic brakes$359.00
Mountain Bike Hardtail$389.00
Mountain Bike Full Suspension$429.00
 Assembly and Boxing
Frame-up build mechanical (new frame and parts)$259.00
Disassemble and rebuild mechanical (frame replacement)$369.00
Frame-up build hydraulic/electronic (new frame and parts)$335.00
Disassemble and rebuild hydraulic/electronic (frame replacement)$429.00
Higher end / in depth build from box (not frame-up)
Assemble from box (or finish attempted assembly)$145.00
Assemble from box (BMX or Singlespeed)
Disassemble and package bike for travel
Thule box rental (per week)$59.00
 Suspension Work
30 hour service (bath oil and external seals)$99.00
60 hour service (oil, external seals, and air spring rebuild)$125.00
Full damper rebuild$145.00
Factory service (suspension goes out for service)
Fork/shock removal and re-installation for factory service

Rear Shock
50 hour service (air can oil and seals)$69.00
Factory service (suspension goes out for service)
Shock eye bushing/reducer replacement (each)$35.00
Shock removal and installation$25.00
Full suspension frame services

Hardware check$29.00
Suspension bearing replacement (per axle)$29.00
Link Replacement$59.00
Drivetrain and Shifting
Adjust/align/install derailleur and/or cable$25.00
Install internal cable$45.00
Install chain$18.00
Install cassette or freewheel$18.00
Install single chainring$39.00
Install multiple chainrings$45.00
Install crankset
Adjust/Install bottom bracket
Overhaul bottom bracket (loose ball)$49.00
Install shifter (each)
Install drop bar brake-shifter combo (each)$65.00
Install flat bar brake-shifter combo (each)
Install MTB AXS group
Adjust electronic derailleur (simple adjustment)
Electronic diagnostic/firmware update
Electronic shifting customization

Rim brake adjust$18.00
Rim brake install$29.00
Rim brake cable install$29.00
Rim brake pads install (per brake)$18.00
Disc brake bleed$39.00
Disc brake align caliper$18.00
Disc brake pads install (per brake)
Disc brake rotor install (per brake)
Disc brake install (hydraulic w/cut and bleed)$59.00
Disc brake install (mechanical)$39.00
Disc brake replace hydraulic line$69.00
Disc brake replace cable$25.00
Cockpit/Front End/Dropper
Headset adjust$18.00
Loose ball headset overhaul$59.00
Headset install (press-in)$69.00
Headset install (integrated)$39.00
Fork install w/cutting$49.00
Fork install pre-cut$39.00
Stem install$18.00
Wrap handlebar$25.00
Flat handlebar install$29.00
Drop handlebar install$49.00
Dropper post install (Internal)
Dropper post install (External)
Dropper post factory service
Tire/tube install$18.00
Install Tubeless Tire(wheel does not need to be taped)
Tire/tube (internal gear or unconventional hub)$39.00
Tubeless setup (per wheel) does not include tape/sealant
Tire insert / Cush Core install (in addition to tire install)
Tubeless setup fat bike (per wheel) does not include tape/sealant
Replace/refresh (per wheel) sealant on existing tubeless wheel
Glue tubular (on clean rim)$49.00
Glue and tape cross tubular (on clean rim)$69.00
Glue removal$25.00
Wheel true minor$29.00
Wheel true major$35.00
Replace broken spoke(s) or nipples (up to 3)$45.00
Wheel re-tension$50.00
Hub adjust$25.00
Hub overhaul (loose ball)$45.00
Hub cartridge bearing replace front or rear
Freehub cartridge bearing replace
Wheel build (fresh parts)$89.00
Wheel rebuild (disassemble and build)$99.00
Wheel disassemble$18.00
E-Bike Services 

Replace tube on rear wheel with motor in hub
Specialized Turbo update firmware (over 1 year old)

Install cargo rack$25.00
Install fenders (short)$18.00
Install fenders (full wrap)$35.00
Install child carrier$29.00
Install computer (basic)$12.00
Install computer (cadence)$29.00
Install computer (power meter, etc.)$35.00
Replace computer battery$12.00
Vehicle Racks
Roof Racks and Accessories

Install base components (feet, fit kit, and load bars)$59.00
Install carrier (each, with base installation)$12.00
Install carrier (each, not with base installation)$18.00
Install box$35.00

Trunk and Hitch Racks
Install trunk rack$12.00
Assemble and install hitch rack$29.00
With new bike purchase over $2500$99.00
With new bike purchase under $2500$175.00
Without bike purchase$249.00