Cycling Shoes

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongue-less sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

At a mere 150 grams, the S-Works EXOS are the lightest cycling shoes to ever come with a Boa® dial. And not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’re still at that World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer, we implemented all the engineering bells and whistles we could think of. And when that wasn’t enough, we thought up some more. The carbon outsole was developed using an advanced form of Finite Element Analysis and pressure mapping to pull out material where it wasn’t needed. This allowed us to keep crazy-high stiffness numbers, too. For the uppers, we completely removed the heel counter. And with a little help from the space-grade Dyneema® mesh and some CubicTec reinforcement, the heel molds to the back of your foot, so nary a watt is wasted. Lastly, we developed a new Warp Sleeve vamp that let us get rid of the toe box, and this further cut down the weight and increased the comfort. Of course we couldn't do any of the above without including our coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but to also increase efficiency and to reduce the risk of injury. The S-Works EXOS are the lightest cycling shoes to ever have a Boa® dial—experience the feeling of lightness. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 - A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - BOA IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, and speed. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 140g (1/2 pair, Size 42)

On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?" - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.

On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, “What shoes are those?” - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.

Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With all of these features combined, you can be sure that we've kept in line with the motto "every watt is sacred." In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)

Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn’t stretch when pulled on, making sure that your foot stays where it’s supposed to. With all of these features combined, you can be sure that we’ve kept in line with the motto “every watt is sacred.” In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC’d alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

A few notes on this shoe -- This product combines our SW Vent upper with our race winning SW Recon outsole to create a one-of-a-kind shoe perfect for long hot days in the saddle. We see this product as the ultimate gravel racing product for hot summer races. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - The Vented Mouthport toe box pulls air in through the front of the shoe and channels it around your feet, while the entire-new, engineered mesh upper and tongue let that air flow freely throughout the shoe—aiding in both cooling and sweat evaporation. Along with the engineered mesh in the upper, we added a layer of Dyneema Mesh to keep strong-hold of your foot, ensuring pro-proven power transfer. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - For power transfer, our PadLock heel construction cradles the heel to ensure optimal power transfer. In fact, it’s been scientifically-proven to improve acceleration. Pair that with two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee, and you can fine-tune your level of foot-hold on-the-fly. - Two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee so you can fine-tune your level of foot-hold on-the-fly. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals.

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single lightweight Boa L6 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper with for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single, lightweight Boa L6 dial that features tool-free snap replacement capability while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)

The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa® S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa® S2-SV Snap Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

In the heat of competition, you want a shoe that maximizes comfort and efficiency during the bike leg, while also helping you get in and out of transition as fast as possible. The new Trivent SC addresses all those needs, with performance-enhancing, tri-specific features, plus Body Geometry ergonomics for true comfort and great fit. Its stiff Body Geometry sole and footbed delivers superb efficiency and power transfer, while the looped heel with pull tab and wide entry/exit closure minimizes time in the transition area. Our pro triathletes demanded ultimate ventilation and faster transitions—you get to reap the rewards. Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT Powerline carbon/composite sole for light, stiff power transfer: Stiffness Index 10.0. - Thermobonded construction for a smooth internal lining for "sockless" fit and comfort. - Large, looped heel pull keeps tab accessible for easy shoe changes in transitions. - Debossed fold lines allow for easy shoe flattening for flying starts. - Supple upper with open-air mesh for maximum ventilation. - Three-bolt cleat pattern fits all major road pedals. - Wide closure system allows for easy entry/exit and disperses forces through the shoe for a comfortable and secure fit. - Rubberized heel for increased traction during transitions. - Approximate weight: 242g (1/2 pair, size: 42)

The Comp Mountain Bike shoes take a whole lot of comfort, mix it with some serious pedaling efficiency, and add a layer of grippy trail traction for good measure. The result is a feature-packed and reliable all mountain shoe that delivers the right mix of performance and durability for a variety of trail conditions. Designed with Body Geometry attributes at the forefront, the comfortable fit and stiff sole provide maximum pedal efficiency and power transfer. The Boa S2-SV dial, meanwhile, is easily replaceable without using any tools, and it allows for on-the-fly fit adjustments. The materials used in the construction are also designed to take a beating, whether it be an accidental root or rock strike, while the SlipNot tread gives you reliable trail traction when you need it. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection-molded nylon composite outsole with SlipNot rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0. - Single Boa S2-SV dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Dial & lace assembly is replaceable in seconds with Snap cartridge system. - Hard-molded toe kick for protection and durability. - Stitched synthetic and mesh upper with asymmetric strap closure for a comfortable fit. - Two-bolt SPD-style cleat pattern fits all major MTB pedals. - Standard Fit last for all-day comfort. - Replaceable toe studs. - Multiple widths available. - Approximate weight: 365g (1/2 pair, Size 42)

Designed for pushing the limits of Enduro racing or Trail riding, the Specialized 2FO Cliplite delivers pedal connection, comfort, and protection as you race down the trail. This ultra-light version of the popular 2FO Clip is engineered for smooth pedal entry and exit thanks to the Landing Strip cleat pocket, meaning you can focus on going fast on the descent, without the weight penalty for your climb back to the top. It’s foot out, flat out—on a diet. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Two independent BOA S2-Snap dials for easy adjustment, backed by the BOA Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off bike comfort. - SlipNot rubber sole for confident traction. - Asymmetric toe box protection where you need it. - Extended length cleat slot (4mm) for rearward cleat set up option. - Smooth thermobonded upper for lightweight durability and a snag-free profile. - Cushioned EVA midsole for comfort with molded heel cup for stability. - Standard Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 379g (1/2 pair, size 42)

Whether heading to the gym or the coffee shop, Specialized's Cadettes are an excellent balance of pedaling performance with off-the-bike cushioning and stability. They feature a Body Geometry sole and footbed for optimum alignment of hip, knee, and foot to improve performance and comfort. With a 2-bolt cleat plate, the Cadette enhances pedaling efficiency yet maintains off bike comfort. The mesh upper is breathable and comfortable, while traditional laces with Lacelock allow for easy adjustment.

The Comp Mountain Bike shoes take a whole lot of comfort, mix it with some serious pedaling efficiency, and add a layer of grippy trail traction for good measure. The result is a feature-packed and reliable all mountain shoe that delivers the right mix of performance and durability for a variety of trail conditions. Designed with Body Geometry attributes at the forefront, the comfortable fit and stiff sole provide maximum pedal efficiency and power transfer. The Boa S2-SV dial, meanwhile, is easily replaceable without using any tools, and it allows for on-the-fly fit adjustments. The materials used in the construction are also designed to take a beating, whether it be an accidental root or rock strike, while the SlipNot tread gives you reliable trail traction when you need it. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Injection-molded nylon composite outsole with SlipNot rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0. - Single Boa S2-SV dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Dial & lace assembly is replaceable in seconds with Snap cartridge system. - Hard-molded toe kick for protection and durability. - Stitched synthetic and mesh upper with asymmetric strap closure for a comfortable fit. - Two-bolt SPD-style cleat pattern fits all major MTB pedals. - Standard Fit last for all-day comfort. - Replaceable toe studs. - Approximate weight: 365g (1/2 pair, Size 42)

Don't let rain or cold stop your ride. The Defroster Trail Mountain Bike shoes feature a seam-sealed bootie construction, Thinsulate insulation, and a neoprene collar to help keep your feet warm and dry even in the worst conditions. Meanwhile, a grippy SlipNot rubber sole provides incredible stability and traction in slippery conditions. They're just what you need to keep riding through the season, no matter what Old Man Winter has in store for you. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Thinsulate 400-gram insulation for warmth, with waterproof, seam-sealed internal bootie construction and reflective heat-loss barrier in the sole. - Sealed canopy and neoprene collar keep heat in and water out. - Nylon composite sole with wet traction SlipNot rubber tread: Stiffness Index 6.0. - Single Boa dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Fully reflective to increase your visibility to motorists in low-light conditions. - Roomy fit to accommodate winter weight socks—no need to size-up. - Durable sheet rubber heel and toe protection. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 533g (1/2 pair, Size 42)

The Expert XC Mountain Bike shoes take the spirit of high performance found in the S-Works iteration and puts it in a value-loaded package. Along these lines, you'll find that it has everything you need to get your feet wet in cross country racing and riding, like a light overall construction, a sophisticated carbon outsole, a single lightweight snap-replaceable IP1 Boa closure, and a durable SlipNot rubber tread. So go ahead, push it a little harder—these shoes are here to take you to the next level. - Body Geometry sole and footbed construction is ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon outsole is designed to flex in the toe for more comfortable walking, while it's directionally stiff in order to increase power transfer. - Boa IP1 Snap dial closure for on-the-fly micro-adjustment, backed by the Boa lifetime guarantee. - Light, supple thermo-bonded upper for a superior fit. - SlipNot rubber outsole is optimized for grip & durability in all conditions. - Removable toe lugs for added traction and run-ups. - Standard Fit for on-bike support and all-day comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 350g (1/2 pair, size 42)

Specialized's Rime Elite mountain bike shoes blend mesh breathability, incredible fit, and a sturdy Vibram sole to create a trail-worthy performer. Body Geometry performance benefits and an ergonomic offset strap round out the unbeatable comfort and value of these shoes. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Vibram rubber outsole for unmatched traction and durability. - Nylon composite internal plate for efficient pedaling performance yet flexible for off-bike adventures: Stiffness Index 7.0. - Three-strap offset Velcro closure and mesh upper for comfortable fit. - Durable synthetic upper with ceramic print graphic and sheet rubber toe handles trail abuse. - Wrap-style tongue for comfort and secure fit. - Standard Fit for all-day support and off-bike comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 420g (1/2 pair, size 42)

The advantages of the next generation S-Works 6 shoes can be summed up in two simple phrases—explosive speed and superior comfort. The speed comes as a direct result of an incredible fit and better connection, delivering more efficiency and power to the pedals. Meanwhile, the new PadLock heel, combined with some outright revolutionarily strong and lightweight materials in the upper, creates a snug fit that's incredibly secure. The result? You have a shoe that helps transfer more of your energy into the pedals when you crank up the watts. Add to this the legendary performance and adjustability of the dual-Boa closure system and the S-Works 6 becomes more than just a shoe, it allows you and your bike to work seamlessly together with maximum efficiency. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest FACT Powerline (patent-pending) carbon plate to maximize power transfer: Stiffness Index 13.0. - Dyneema Cubic Tech directional fibers are thermobonded to create no stretch zones for ultimate connection. - Independent Boa S2-Snap dials for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - PadLock molded heel and one-piece stroble upper for superior fit. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

When seconds count (which is really every triathlon if we're being honest with ourselves), your shoes need to get you through the transition quickly. More so, they need to deliver maximum performance out on the road. That's why we designed the S-Works Trivent for the highest level of competition, so we can sleep easy at night knowing that they're the most highly engineered triathlon shoe in the world. There are two kinds of speed in tri—the speed that you can get your shoes on with and your speed out on the road. For the former, the Trivent features our revolutionary Tri-Specific Drawbridge closure system that leaves the heel of the shoe "popped" open and ready for entry in the transition. The Launch Clip, meanwhile, puts the shoe in the level position for the best flying start possible. And when you combine this with a temperature-regulating construction, a stiff and efficient carbon sole, and Body Geometry ergonomics, you get the total performance package you've been longing for. Now, you’re one step closer to your best time ever. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Revolutionary Tri Specific Drawbridge closure for the fastest possible time in both transitions (patent pending). - FACT 12.0 carbon sole uses high modulus, unidirectional carbon fiber, and TorsionBox construction to optimize stiffness and weight. - Lightweight Boa L4 closure system backed by the Boa Lifetime Guarantee. - Replaceable high-strength braided steel lace. - Arch-mounted Launch Clip for flying starts (patent pending). - Smooth internal lining for "sockless" riding fit and comfort. - Open tongue design for breathability and drying with toe Velcro closure. - Replaceable heel lugs. - Light, tough, and water-resistant Micromatrix upper for supple comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 280g (1/2 pair, size 42)

Remarkable performance and value make the Specialized Sport MTB shoes a remarkable pair of mountain bike shoes. This durable, lightweight shoe features Body Geometry fit, comfortable offset Velcro closures, and a sole with improved traction for hiking. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection-molded nylon composite outsole with rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0. - Three-strap offset Velcro closure for comfortable fit. - Durable synthetic leather and vented mesh upper. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits. - Standard Fit for all-day comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 360g (1/2 pair, size 42)

The Sport RBX Road shoes were developed to be the perfect fit for commuting and for anyone looking to get their first pair of clip-in shoes. They have a stable rubber sole and our patented Body Geometry comfort, so they'll cover the distance from all-day rides to a stop at the cafe. - Body Geometry sole and footbeds are optimized for proper hip, knee, and foot alignment in order to improve overall performance and comfort. - Moderately stiff nylon plate increases pedaling efficiency, with a SlipNot sole and walkable rubber tread: Stiffness Index 6.0. - Three offset Velcro strap closures for a comfortable fit. - Synthetic upper with mesh venting for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits. - 2-bolt cleat system fits all major mountain pedals. - Approximate weight: 380g (1/2 pair, Size 42).

The Specialized Women's Tahoe mountain bike shoes were designed to deliver rugged and dependable off-road performance, especially if your rides see a good deal of hiking. To do so, they feature a SlipNot rubber outsole for added grip over roots and wet terrain. And to keep the shoes stiff enough for riding and flexible enough for walking, they also have a Lollipop inner plate that sits in a bed of comfy EVA padding. The fit is relaxed for everyday use, and the Body Geometry sole provides ergonomically designed comfort and efficiency. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot rubber compound developed in Specialized's tire lab optimizes shoe and pedal connection. - Stiff Lollipop inner plate delivers high performance pedaling, and it sits in a bed of EVA to soften landings and maintain off-the-bike traction. - Relaxed Fit for a balance of pedal feel and walking comfort. - Lacelock elastic keeps laces out of chainrings. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Toe and heel overlays provided added abrasion resistance. - Approximate weight: 325g (1/2 pair, size 39)

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. They have Velcro closures for a customizable, adjustable fit, a comfortable design, and a composite outsole that provides just the right level of rigidity. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Three-strap offset Velcro closure for a superior fit. - Synthetic upper with mesh venting for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt and two-bolt cleat pattern fit all major road and mountain pedals. - Approximate weight: 290g (1/2 pair, Size 42)

The best Mountain Bike shoes deliver durability and comfort—with the Specialized Motodiva, you get that, plus great traction on the trail. As an all-around trail-riding shoe, it’ll take the all the bumps and grinds the trail dishes out while providing a comfortable and supportive fit, with the added security of grippy Slipnot traction on rocky hike-a-bike sections. Body Geometry sole construction combines with the women’s contoured fit to provide great power transfer, while the Boa dials deliver true on-the-fly adjustability. If you’re looking for a great do-it-all shoe, the Motodiva is durable, comfortable, and ready to hit your favorite loop with you.