Mavic Ksyrium Pro SL Wheels

Mavic Ksyrium Pro SL Wheels
  • Wheelset: Front/Rear: Front
  • Wheelset: Front/Rear: Front
  • Wheelset: Front/Rear: Rear
  • Wheelset: Front/Rear: Rear
$516.95 - $1,149.90
This product is not available for online purchase. Please call us at 781-447-7223 or visit our store.


Ksyrium Pro SL wheels take some of Mavic’s most weight-saving technologies and roll them all into one set of wheels. Their ISM 4D process aggressively removes Maxtal alloy material from the parts of the rim that undergo the least amount of stress, leaving material where the rim needs it most—at the spokes. The result is a rim with the same strength and stiffness, but drastically reduced weight. It also smooths the aerodynamic profile of the rim, helping you slip through the air relatively unnoticed. Mavic’s lightweight and aerodynamic bladed Zicral aluminum spokes keep the rotating mass even lower while offering a high strength-to-weight ratio. The stiffness and toughness factors are further increased both by the Fore integrated spoke nipples which screw directly into the rim, and by Mavic’s Isopulse lacing pattern that helps to even the spoke tension balance side-to-side while sending pedaling torque through the hub to the non-drive side, allowing rapid acceleration and greater rear wheel reliability. Incredibly smooth QRM+ bearings keep you rolling, fast and efficient, and Mavic included Yksion Pro tires that command the road with front- and rear-specific designs designed according to the specific qualities these tires individually require. Together the Ksyrium Pro SL wheels and Yksion Pro tires make a wheel-tire system that will carry you many miles with new-found speed, comfort, and control.

Mavic ISM 4D


Inter Spoke Milling 4 Dimensions:

An exclusive Mavic patented concept, ISM 4D significantly reduces weight and inertia without compromising durability. Quicker accelerations, better handling and more resistance: the right mix to make the most of any ride. The smooth profile also helps reducing aerodynamic drag.

Mavic GripLink Front Tire


Grip and control:

A front tire, whether a clincher or a tubular, must enhance the front wheel’s ability to grip the road and control the bike. Therefore, GripLink tires are optimized for front use by offering superior cornering grip and extra puncture protection.

Mavic PowerLink Rear Tire


Low rolling resistance:

A rear tire, whether a clincher or a tubular, must enhance the wheel’s ability to transfer power and generate speed. Therefore, PowerLink tires are optimized for rear wheel use by minimizing rolling resistance.

Mavic FTS-L Freehub Body


Force Transfer System Light:

Reinforcement of a key transmission component: the contact area between the pawl and the hub body is reinforced by two stainless steel inserts, which allows the use of a 100% aluminum hub body.

Mavic Fore Integrated Aluminum Nipples


Stiffer and stronger:

Instead of being drilled for spoke nipples, the lower rim bridge is pushed up on the inside and threaded to make it possible to directly screw the nipples into the lower rim bridge, eliminating the need to drill the upper rim bridge. Besides improving the nipple-rim interface, this design is ideally suited to tubeless tire setups and helps maintain rim integrity.

Mavic Isopulse Spoke Lacing


Optimum energy transfer:

The spokes are laced radially on the drive side and 2-cross on the non-drive-side to maximize drive-side dish, providing a better spoke tension balance between left and right flanges.

Mavic QRM+


Qualité de Roulements Mavic + :

QRM+ is Mavic’s most demanding level of hub and bearing precision. It uses only double-sealed cartridge bearings with C3 internal clearances and features a system for making micro-adjustments to bearing preload.

Mavic Zicral Straight-Pull, Bladed, Aluminum Spokes


Lightweight, stiff, and strong:

Zicral spokes are made of a specific aluminum alloy to achieve a higher stiffness-to-weight ratio while maintaining high strength.

Mavic Maxtal Alloy


Lightweight and strong:

Exclusive to Mavic, this specific aluminum alloy offers a higher strength-to-weight ratio than conventional 6106 alloy, allowing greater latitude in design while maintaining high strength and durability standards.

Mavic SUP Welded and Machined


Soudé Usiné Process:

After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish, resulting in a stronger, smoother, more reliable rim joint.

Mavic UB Control Machined Braking Surfaces

UB Control

Usiné Brut Control:

The rim’s braking surfaces are precisely CNC machined for smooth, predictable braking and less brake chatter.


Size(s) 700c
Model Clincher
Rim Material Maxtal aluminum
Rim Depth Front: 24mm, Rear: 26mm asymmetrical
Rim Width 15mm, internal
Hub(s) Mavic QRM+: Front: carbon/aluminum; Rear: aluminum
Spokes (Front/Rear) Zicral aluminum, straight-pull, bladed; front: double-butted
Holes (Front/Rear) 18/20
Nipples Fore integrated aluminum
Axle(s) Aluminum
Skewer(s) BR601 Quick-release
Weight (Front/Rear) 600 grams /795 grams (1395 grams/pair)
Lacing (Front/Rear) Front: radial; Rear: Isopulse (2x, non-drive side; radial, drive side)
Cassette Compatibility Shimano/SRAM 11-speed or Campagnolo 11-speed
Tires Mavic Yksion Pro, Front: GripLink; Rear: PowerLink, 700 x 23c or 700 x 25c
Extras Quick-releases, multifunction adjustment wrench, user guide

* Subject to change without notice.

Part Numbers

Option UPC MPN
Campagnolo 11-speed (E11) / 23mm / Pair 887850790691 72501
Campagnolo 11-speed (E11) / 23mm / Rear 887850790738 R7710100
N/A / 23mm / Front 887850790639 F5140100
Shimano/SRAM 11-speed (M11) / 23mm / Pair 887850790714 72501
Shimano/SRAM 11-speed (M11) / 23mm / Rear 887850790752 77101
N/A / 25mm / Front 887850790646 51401
Campagnolo 11-speed (E11) / 25mm / Pair 887850790707 72501
Campagnolo 11-speed (E11) / 25mm / Rear 887850790745 77101
Shimano/SRAM 11-speed (M11) / 25mm / Pair 887850790721 72501
Shimano/SRAM 11-speed (M11) / 25mm / Rear 887850790769 77101