The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously fast rolling 29 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear -Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for the front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1800g
In the early design phases of our Traverse Fattie 29, we recognized that the number of aluminum wheels that had the prowess to both shred rowdy descents and to provide the efficiency required of our Northern California testing grounds' relentless climbs were far and few between. We also came to realize that trail riders expect certain features in a proper, send-it-ready wheelset. And for the price, we found that alloy hit many of these expectations, while also keeping enough jingle-jangle in your wallet for a post-ride beverage. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. We took the traditional 19- to 23-millimeter standard and moved it out to what we found worked best in testing—a whopping 30mm “Fattie” width. A wide rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, it affords you the ability to run lower pressures, and it spreads impact out over a larger surface area to reduce the risk of damage. We also added our Zero Bead hook design to the mix, and this ultimately aids in preventing “burps” during hard cornering, while also making tubeless set up quick and easy. After developing what we found to be the perfect alloy trail wheels, we went farther down the perfection path, hand-lacing the rims to our own alloy hubs that allow for the same spoke length throughout the entire wheelset, via 28 DT Swiss Revolution J-Bend spokes and Pro Lock nipples. Inside our hubs, you'll find sealed cartridge bearings and DT Swiss 360 rear internals that'll keep you rolling smoothly for miles. We also wanted to ensure that each wheel was built correctly, so we built them by hand. Each wheelset comes packaged with a SRAM XD-driver and a tubeless valve stem in order to make tubeless set-up a touch easier. Please note that Shimano freehubs are sold separately.
Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 29 puts all the features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
What you're looking at here is gravity's nemesis: Roval's Control SL 29 Wheelset 148. At 1,330 grams, you'll climb XC courses with ease on these lightweight, hookless-bead, carbon hoops. They're built to withstand grunting up climbs, descending with abandon, and blasting in and out of corners with Specialized carbon rims, DT Swiss spokes, and DT Swiss's legendary 240 rear hub internals. The Boost spacing offers increased width on the front and rear hub flanges, and in turn, increased frame and fork clearance and stiffness. This combines to deliver a more durable wheel system at a minor weight penalty. Plus, these sweet race-ready wheels are tubeless-compatible so you are ready for anything that the trail throws at you.
The Roval Control SL 29 Torque Tube 148 wheels are nearly identical to the Control SL 29s, with the only exception being at the front hub. With the Torque Tube 148mm variant, you receive all of the benefits that Boost spacing offers while continuing to run a RockShox RS-1 fork. By increasing the width of the rear hub flange, and in turn, increasing frame clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. If you're running an RS-1, you'll get hand-built, ultralight carbon perfection with a Zero Bead Hook design. This design pairs perfectly with tubeless tires, while also increasing both strength and impact-resistance. Meanwhile, the rims have been laced via DT Swiss Competition Race spokes to strong alloy hubs with DT Swiss 240 internals (rear only) that serve-up lightening-fast engagement and acceleration.
The name Crossmax is synonymous with XC riding and racing. This new tubeless-ready wheel boasts many of the same features and technologies as premium XC race wheels, but at a more attainable price. One of the key factors is Mavic's UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The new rim design features a 22mm internal width with a hookless profile. The wheels are built with 24 straight-pull spokes to save weight and maximize wheel strength, so you get just the right balance of efficiency and durability. Power transfer is handled by Mavic's TS-2 freehub, which is compatible with all common axle standards. It’s available in Boost or Non-Boost hub widths and can be used with quick-release or thru-axle setups with optional adapters.
Years of analyzing wheels as a complete system, and testing them under the most demanding XC race conditions, has proven one thing: the reduced inertia of a superlight rim creates huge performance gains. That’s why Mavic engineered the Crossmax Elite with their lightest aluminum rim, the same one used in the Crossmax Pro. The rim is engineered with ISM 4D (Inter Spoke Milling) technology, which machines the rim between each spoke hole to minimize weight without compromising strength. The rim is wider (22mm internal) and features the UST tubeless system for improved traction, reduced risk of punctures and easier tire mounting. QRM hubs deliver smooth, long-lasting performance, and the fast-engaging ITS-4 freehub enhances the quick and dynamic feel. On the scales, the Crossmax Elite leads its category: 1635g in 27.5, and 1715g in 29. And it’s available in Standard (15x100 and 12x142, convertible to quick release) or Boost (15x110 and 12x148) hub spacing in 27.5 and 29 versions.
With a proven design and a new 22mm wide (internal) UST-welded rim that’s lighter without compromising strength, this wheel is for XC riders seeking the benefits of tubeless technology. The user-friendly UST system offers all the benefits of tubeless including better traction, comfort and a reduced risk of punctures. Built with 24 straight-pull, double-butted spokes to save weight and maximize wheel strength, you get just the right balance of efficiency and durability. Power transfer is handled by Mavic's alloy TS-2 freehub, which is compatible with all common axle standards. It’s available in Boost or non-Boost hub widths and can be used with quick-release or thru-axle setups with optional adapters.
It costs much more to build an XC wheel with carbon than aluminum, but racer feedback tells us the performance boost doesn’t always live up to the cost. That’s why Mavic engineered the Crossmax Pro Carbon to be significantly lighter and laterally stiffer than alloy, but to also have the same impact resistance and, most importantly, enough vertical compliance to achieve the ride quality synonymous with the Crossmax name. They pushed their exclusive Finite Element Simulation software to the limit to find a carbon layup that would best balance these attributes. To ensure compatibility with the most common XC tire widths (2.1 to 2.25), Mavic created a 23mm hookless rim profile for optimal performance. It is UST compliant for improved traction, puncture resistance and convenience, and the rim is sealed with specifically designed tape. Asymmetric rims balance the spoke tension, using 24 double-butted steel spokes to achieve that sweet spot between lateral stiffness and vertical compliance. At only 1470g in 27.5'' and 1510g in 29'', the Crossmax Pro Carbon meets the demands of pro racers who have ridden them to World Cup podiums. The hubs are compatible with standard (15x100 and 12x142) and Boost dimensions (15x110 and 12x148).
Engineered with a wider rim that’s precisely machined for lighter weight and uncompromising strength, the Crossmax Pro elevates the XC experience—whether you’re racing, training or just shredding trails. With an internal width of 22mm and Mavic's patented ISM 4D technology, the rim provides a lightweight and dynamic ride quality. The ISM 4D process machines the rim between each spoke hole. This reduces weight without compromising strength, making it easier to climb and accelerate. The Zicral spokes and Isopulse (rear) lacing increase wheel stiffness for sharp, predictable handling. This is a fully tubeless UST system without the use of tape, making it easy to experience the benefits of tubeless, including better traction and fewer punctures. The system is compatible with quick release and 15mm thru-axle on the front, quick release and 12mm thru-axle in the rear. You can choose standard (15x100 and 12x142) or Boost versions in either 27.5-inch and 29-inch.
$140.95 - $299.90
Mavic's Crossride wheels have been a favorite choice among cross country mountain bikers for years. This is due in no small part to their reputation for durability, reliability, and light weight. To achieve this, Mavic laced up the Crossride with 24 stainless-steel bladed spokes, front and rear, and have been constantly improving hub designs to be stronger and lighter in weight. Their QRM bearing standard keeps you rolling smoothly mile after mile with little or no maintenance, and they come with adapters for different axle standards, making your Crossrides versatile for multiple applications.
The XA Elite was born to meet the needs of adventurous trail riders to push the limits on challenging terrain. Lightweight, strong and engineered to deliver confidence and control, it boasts purpose-built features for off-road performance. The first thing that sets this Wheel System apart from the competition is its rim. It uses Mavic's patented ISM 4D technology to remove all but the most necessary material. This means snappier acceleration and a more dynamic ride quality. A new wider (25mm internal width) rim features UST technology so it’s easier to experience the improved traction and control of tubeless tires. The rims are laced to Mavic's proven QRM hubs for smooth, dependable performance no matter how rough the conditions. The ITS-4 freehub delivers fast engagement to further enhance the dynamic feel. The entire wheel system weighs an impressive 1770g for 29".
There’s something incredibly pure about trail riding: the feeling of exploration and the satisfaction of cleaning a technical section are hard to beat. It’s just you versus the terrain so you need gear that won’t let you down. The XA Light provides versatile comfort and control thanks to a new UST welded rim that’s wide (25mm internal), light and strong. It’s also Tubeless Ready, so it’s easy to enjoy the benefits of tubeless tires, including better control and traction along with a reduced risk of punctures. Double-butted spokes save weight without sacrificing strength or durability. We’ve also fine-tuned the hubs and power transfer with Mavic's alloy TS-2 freehub, which is compatible with all axle sizes as well as XD drivetrains. The hubs are compatible with most modern standards (15x100/12x142) and can easily be converted to other options (9x100 front, 9/12x135 rear) with optional adapters. The XA Light is available in either 27.5" or 29" wheel sizes.
Engineered with the same spirit of innovation that made Mavic the first to create the mountain bike wheel system, and also the first to introduce the tubeless mountain bike wheel system, this all-new wheelset elevates the trail riding experience. Made with a lightweight aluminum rim that has zero compromises in strength and lateral stiffness, it delivers all-around performance on a variety of terrain. The rim features Mavic's ISM 4D technology to remove unnecessary material, minimizing rotational weight. With its 25mm internal width it is fully UST Tubeless compliant to maximize the performance of tubeless trail-riding tires. The wheels are built up with 24 bladed Zicral spokes for lateral stiffness and just enough vertical compliance. The XA Pro wheel system is compatible with all current axle standards including Standard and Boost.
Save energy on the climbs and rail rugged descents with higher speeds and total control. Mavic engineered the XA Pro Carbon to be significantly lighter and laterally stiffer than any aluminum wheel, but also retained the impact resistance and vertical compliance that gives Mavic Wheel-Tire Systems the ride quality they’re known for. The XA Pro Carbon is the lightest wheel system in its category (1490g for 27.5” and 1535g for 29”). So you know it helps you climb and accelerate faster, but where it really shines is in the way it handles rough and challenging terrain. Mavic engineered a wide 26mm hookless rim profile that’s fully UST Tubeless compliant for improved traction, puncture resistance and ease of use. These asymmetric rims are fine-tuned to optimize spoke tension and they use 24 double-butted steel spokes to find the sweet spot between lateral stiffness and vertical compliance. Hubs are 6-Bolt only and compatible with all current axle standards including Standard and Boost.
Page 1 of 1