Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Shoes

$25.00
Replacement Boa® Snap 3 dials for S-Works 7 Road shoes. - Includes one cartridge dial assemble and lace. - Left- and right-specific.
$30.00
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element Toe Covers, history is doomed to repeat itself this winter. Soft Shell fabrics are synonymous with unrivaled protection and quality and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your toes are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Fabric Content: Knit 44% Polyester, 38% Nylon, 14% Elastane, 4% PU. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Universal cleat opening means that the covers are compatible with both road and mountain shoes.
$30.00 - $35.00
When warm socks aren't enough, but waterproof shoe covers are too much, our Reflect Overshoe Socks are your ticket to warm toes. They're made from an abrasion-resistant, knitted yarn that not only adds an extra layer of warmth, but ensures you'll be using them for seasons to come. At the top of the overshoe, you'll find a reflective band that helps increase your visibility in low light conditions. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibility to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
$40.00
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
$40.00
- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
$40.00
A little cold or windy weather in the forecast? No problem. When full shoe covers are overkill, pull on our Neoprene Toe Covers for just the right amount of warmth and protection. Perfect for short winter rides or longer shoulder season excursions, the stretchy, weather-resistant design is compatible with all cleat types. Abrasion-resistant panels add durability, so feet stay comfortable ride after ride. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester
$45.00
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Neoprene Toe Covers, history is doomed to repeat itself this winter. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Fabric Content: 100% Neoprene
$55.00
Comfortable elasticized shoe cover with rear zipper. - Made of elasticized Elastane for great comfort. Elastic band on the top opening and rear zipper - Reflective tape on the rear part, lateral S-logo print. - European sizes S (35-37) M(38-40) L(41-43) XL (44-46)
$70.00
Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements - Rear Velcro closure
$70.00
For a little extra protection in the cold for your toes, slip on a pair of the Element Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Rear zipper closure securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Fabric Content: MAIN: 44% Polyester, 38% Nylon, 14% Elastane, 4% PU; TOE & HEEL: 100% Polyester
$70.00
For some serious protection in the cold and wet for your toes, slip on a pair of the Neoprene Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Rear opening with zippers securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion resistant toe and heel sole utilizes universal welted velcro closure, so these covers are compatible with both road and mountain shoes. - Fabric Content: 100% Neoprene
$85.00
We all have our tricks for successful cold-weather riding. Want to know ours? Neoprene Shoe Covers. Made for cold, wet, and windy days on the bike, stretchy neoprene and fully taped seams help keep feet dry and comfortable mile after mile. Whether you’re suiting up for a gravel adventure or a road ride, the universal cleat opening makes it easy to pull on over your preferred cycling shoe type. Abrasion-resistant panels in high-wear areas add durability. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester
$90.00
From sprinkles to downpours, our Rain Shoe Covers are built to keep feet dry and comfortable in wet weather. Fully taped seams and a breathable Polartec® NeoShell® membrane seal out wind and water while also letting sweat escape, so feet feel fresh all ride long. Designed to fit snugly over cycling shoes, the four-way stretch material makes them easy to get on and off. - Fully taped seams prevent water intrusion. - Polartec® NeoShell® fabric is breathable, stretchy, and completely waterproof. - Abrasion-resistant toe and heel sole with velcro closure. - Fabric Content: 65% Nylon, 35% Polyester.
$100.00
The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
$100.00
The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
$100.00
Windy descent. Sudden downpour. Cold, high-elevation climb. Whatever the ride throws your way, our Neoprene Tall Shoe Covers keep feet comfortably pedaling onward. Stretchy high-cut neoprene and fully taped seams keep feet dry and protected in wet and windy conditions. Gravel or road ride, the universal cleat opening accommodates your preferred shoe type. For added durability, abrasion-resistant panels are strategically placed in high-wear areas to ensure these overshoes hold up year after year. - Fully taped seams prevent water intrusion to keep you dry and protected in wet conditions. - Zipperless construction for a comfortable fit around your ankles. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester
$110.00
With the Recon 1.0 our goal was simple—put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we’ve created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat—efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we’ve covered the nylon outsole with our SlipNot compound. We’ve also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and even more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)
$110.00
With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)
$110.00
If you're on the hunt for a capable, tough, and versatile pair of mountain biking shoes, look no further than the Rime 1.0. They feature a host Body Geometry hallmarks that you'll find in all of our shoes, plus sweet tech like an X-PEL water management system and a DWR coating that reduces water absorption while drastically improving dry time. And to round out the package, we included a SlipNot Rubber outsole, a Lollipop midsole, and a relaxed fit that balances pedal feel and off-the-bike comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Laces and Hook-and-loop overstrap provide a comfortable with one-hand adjustability - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 370g (1/2 pair, size 42)
$110.00
If you're on the hunt for a capable, tough, and versatile pair of mountain biking shoes, look no further than the Rime 1.0. They feature a host of Body Geometry hallmarks that you'll find in all of our shoes, plus sweet tech like an X-PEL water management system that reduces water absorption while drastically improving dry time. And, to round out the package, we included a SlipNot Rubber outsole, a Lollipop midsole, and a relaxed fit that balances pedal feel and off-the-bike comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Laces and Hook-and-loop overstrap provide a comfortable with one-hand adjustability - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.
$120.00
There is nothing like canvas to keep you cool during hot laps or at the post-ride hang spot. The 2FO Roost Canvas combines a durable canvas upper, cushioned EVA foam midsole, and relaxed fit to create a shoe that won't lose its cool. And our SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection to keep you in control through the heaviest rock gardens, making the 2FO Roost Canvas a great pair of kicks with ridiculous trail performance and off-bike comfort and style. Paint Your Trail - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot™ ST rubber sole for unsurpassed flat-pedal grip and connection. - Canvas and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 360g (1/2 pair, Size 42)
$120.00 - $130.00
If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Approximate weight: 367g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper conforms to the foot and is built to last. - Two-bolt cleat pattern fits all major mountain pedals.
$120.00
If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy. - Approximate weight: 360g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort and impact absorption. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection.
$120.00
To Slip or SlipNot™; 2FO Roost delivers grip, durability, and light-weight unmatched by any trail shoe. The SlipNot™ sole sets the standard for stickiness, traction, durability, and pedal feel. Built with a fully synthetic upper and Airmesh padding—meaning the 2FO Roost is super light-weight, comfortable, and durable, and for those times when you go full-submarine, it dries really fast. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - DURABILITY: Every detail designed for durability on the dirt, from upper to outsole to toe-kick to heel-cup, and everything in between. Offering superior support, durability, and fast drying for year-round riding. - PROTECTION: Forefoot TPU toecap offers protection from stones and roots on fast technical descents. - SUPPORT: Internal heel counter adds support without bulk. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - LACED UP: Laces and eyelets offer easily adjustable comfort and a locked-in fit - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
$120.00
Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single lightweight Boa L6 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper with for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)
$120.00
Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single, lightweight Boa L6 dial that features tool-free snap replacement capability while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)
$140.00
Mountain: Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider designed to have just as much performance when hiking as it does when riding. The proprietary SlipNot SuperTacky rubber sole was developed to strike a perfect balance of pedal grip and trail kick. To aid in climbing steep and loose trails, we've built in a flexible toe section that makes it easier to kick into the terrain, giving you a leg up when you hike up. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 386.5 grams
$150.00
The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Two-bolt cleat pattern fits all major mountain pedals. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
$150.00
The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 395.9 grams
$150.00 - $160.00
The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Approximate weight: 395.9 grams - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
$160.00
Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)
$170.00
Built for high-alpine terrain, the Rime 2.0 Hydroguard brings rugged capability to ensure you can conquer any mountain trail in any conditions. The internal Hydroguard membrane helps keep your feet dry through stream crossings, puddles, and splashes and prevents the shoe from becoming water-logged. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Internal Hydroguard membrane keeps feet dry through puddles, splashes, and stream crossings. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.
$170.00
The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)
$180.00
The Recon 2.0 was made for riders who seek out dirt roads and challenging trails in search of a shoe that delivers comfort and efficiency in a durable package, with the scientifically proven performance benefits of Body Geometry. Whether you’re saddling up a Diverge or Creo to ride with your gravel group or hopping on your epic to embark on an all-day trail session, the Recon 2.0 is your partner in crime for days spent in the dirt. Body Geometry: Like every Body Geometry shoe, the Recon 2.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science. Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling. Efficiency: The Recon 2.0 features a Li2 Boa Dial for adjustability on the fly, making getting in and out of the shoe a breeze. BOA soft-lace cables made from a Dyneema yarn allow us to do away with hard molded guides for a more comfortable fit. The forefoot strap above the toes helps riders adjust volume around their toes to tailor the fit to their unique foot, connecting you to the bike for confidence when hitting a new feature or tackling loose and technical gravel. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA® Li2 dials for on-the-fly micro-adjustment. - SlipNot™ rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 307g (1/2 pair, Size 42)
$180.00
If you're ready to step up to a higher-performing option that looks good and feels great, the Torch 2.0 is the perfect upgrade for you. The Torch 2.0 is the ideal intersection of high performance and comfort, offering you a pair of shoes you can count on, whether you're joining their first group ride or clipping into the spin bike to get their sweat on. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Woven Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - BOA Li2 dial for dual direction micro-adjustments and pop release, forefoot strap for fine-tuning fit - Seamless Synthetic upper for a supple fit. All over laser perforation added breathability - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 268g (1/2 pair, Size 42)
$225.00 - $230.00
The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)
$225.00
Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding
$250.00
Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)
$325.00
The new S-Works 7 Lace takes the performance of the winningest road shoe in the world and combines it with laces to create one of our most supple and adaptable uppers for next-level fit. Paired with our Body Geometry technology for optimum foot, knee, and ankle alignment, going fast never looked so good. By utilizing laces, the shoe offers 12 separate points of tension adjustment to dial in the perfect hold across the entire foot, while the removal of plastic hardware allows the engineered mesh upper to adapt to more foot shapes for a sublime, supple fit. The S-Works 7 Lace fits like a leather glove, but you know, for your foot and made of engineered mesh and carbon. But laces have more to bring to the party. The removal of plastic hardware also shaves considerable weight. One size 44 S-Works 7 Lace weighs a feathery 236 grams, so you’ll be looking good and feeling good when the road points uphill. The foundation for all this is the technology pioneered for the S-Works 7. Our Powerline carbon outsole—our lightest and stiffest outsole ever—creates the ideal platform for power delivery. Our PadLock heel comfortably holds the rear of your foot, while the engineered mesh upper delivers a stable yet supple hold for all-day power delivery. Whether you’re looking for a relaxed coffee ride shoe, a lightweight climber, or a supple and adaptive fit that compliments your race shoe, the S-Works 7 Lace marries classic style to race-winning heritage and performance. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Non-stretch laces provide even hold across the entire foot that stays consistent all ride long. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0. - Engineered mesh is combined with no-stretch TPU zones for the ultimate connection and comfort. - PadLock™ heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximately 236g per shoe (size 44)
$325.00
On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?" - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.
$350.00
The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).
$425.00
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$425.00
When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$450.00
From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$249.99
A new standard Trek Velocis Road Cycling Shoe is a high-performance road shoe designed for committed cyclists who need power and everlasting comfort on every road ride, no matter the distance. All-new METNET relief zones deliver flex in all the right places. Two Li2 BOA dials provide a secure and precise fit. A carbon composite plate ensures excellent power transfer. - METNET relief zones stretch and conform to the foot to relieve common hot spots and discomfort - InForm Pro Last provides an ergonomically optimized, high-performance fit - Dual Li2 BOA dials provide low-profile, on-the-fly micro-adjustability for a precision fit - OCLV Carbon and fiberglass composite plate provides excellent power transfer - Compatible with 3-bolt cleat systems
$499.99
A material advantage Trek RSL Knit Road Cycling Shoe is a forward-thinking engineered knit race shoe that is exceptionally comfortable, breathable, and incredibly fast. Trek RSL Knit Road Cycling Shoe is an all-out race shoe that defies convention. Years in development, this shoe was engineered to provide maximum power transfer and all-day comfort, allowing you to elevate your performance during every ride or race. Engineered performance knit provides a supportive, sock-like fit. All-new METNET relief zones flex in all the right places, while METNET power straps lock in the foot for maximum efficiency. Coupled with a 100% OCLV Carbon plate and two Li2 BOA dials, this shoe is fast, comfortable, and light. - Engineered performance knit provides a comfortable, sock-like fit and excellent breathability - METNET relief zones stretch and conform to the foot to relieve common foot discomfort - Updated Trek Pro Last provides a wider performance fit to better match the average foot - Dual Li2 BOA dials provide low-profile, on-the-fly micro-adjustability for a precision fit - 100% OCLV Carbon plate provides excellent power transfer for optimal pedaling efficiency - Internal heel cup and no-slip heel lining prevent slippage and improve efficiency - Insoles are made with Rise by BLOOM, a bio-based EVA foam replacement - Compatible with 3-bolt cleats
Page 1 of 2 Next page