Pedals
$100.00
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life.
- Simple installation with a 8mm hex key
- Stainless Steel cleat plate provides a solid pedal interface
- Adjustable spring tension
- 7° float, 3-bolt split-cleat included
- Cleat Interface: Look KeO
- Material: Carbon
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Single-Sided Clipless
- Spindle Material: Chromoly steel
- Weight: 266 grams
$110.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
$149.99
The exceptional comfort and versatility of the Speedplay Comp road pedal derive from its confidence-inspiring and stable platform, offering both value and performance mile after mile for cyclists of all levels. Precise engagement, effortless release, and dual-sided entry with the Easy Tension Cleat deliver ease of use and confidence to the rider.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
Versatile performance defines the advanced Speedplay system. Utilizing this innovative platform, Comp's confident engagement and stable platform provide benefits to riders at every level.
- Weight: 224g (per pedal pair)
- Spindle Material: Chromoly
- Spindle Length: 53mm
- Float: 5 to 15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$9.99
Get back on the road with original equipment pedals.
GENUINE REPLACEMENT PARTS
Keep your bike operating as it should.
PRODUCT DETAILS
- Dialed fit for kid sized feet
- Sold in pairs
$150.00
The ATAC XC 10 is a favorite pedal of competitive riders because of its light weight and ergonomic design. The pedal features the lightness of a carbon body with the durability of a hollow steel axle, as well as tension adjustment to fit your needs. Freedom of movement, lateral and angular, for reduced injuries and muscle fatigue. The pedal’s self-cleaning design clears mud and debris each time you step in. The ATAC XC 10 offers easy and consistent engagement with tension adjustment to meet your pedal preference and needs. This pedal is a great option for cross country, gravel, or cyclocross.
- Designed for performance in off-road conditions; Ideal for cross country, gravel, or cyclocross
- Carbon fiber body with hollow steel spindle for durability
- Easy clip-in and pedal engagement with self-cleaning ATAC cleat design that clears mud with every step-in
- Tension adjustment
- ATAC Standard Cleats included
$90.00
The ATAC XC 6 is an ideal option if you’re looking for a great deal in a performance pedal for cross country. The pedal features top ergonomics with a steel axle for durability, a composite body, and tension adjustment to customize the feel of the pedal underfoot. The exclusive ATAC clamping system offers easy engagement, and the open design automatically clears debris each time you step in.
- Durable design for cross country, gravel, or cyclocross
- Composite body with steel spindle for durability
- Easy clip-in and pedal engagement with self-cleaning ATAC cleat design that clears mud with every step-in
- Tension adjustment
- ATAC Standard Cleats included
$16.99
- One-piece ABS resin body
- Non-slip rubber surface
- Boron spindle
- 388g pair
$80.00
With loads of traction, sure-footedness, and premium control, Specialized's Bennies Platform Pedals are ready for everything from freeride madness to trail riding. They're made of a rugged, yet lightweight concave aluminum body with 24 replaceable pins for maximum grip. Durable chromoly axles and sealed cartridge bearings mean they're built to last.
- 430 grams (pair)
- Width x Length: 100 x 105mm
- Thickness: 17.30mm in the center/19mm at each end
$124.99
- Large pedal platform
- Lower platform height for pedaling stability
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-moly spindle with 8 mm hex wrench mount
- Sealed mechanism
- SM-SH51 Cleat included
- 1.0 mm cleat spacer included
- Binding: Dual sided
- Cartridge axle
- Cleat retention adjuster
- Average weight: 342g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)
$130.00
- Wide pedal-to-shoe contact
- Lower platform height for pedaling stability
- Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-molly spindle with 8 mm hex wrench mount
- Sealed mechanism
- 1.0 mm cleat spacer included
- Binding Dual sided
- SM-SH51 Cleat included
- Cleat retention adjuster
- Integrated cage
- Cartridge axle
- Average weight: 438g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)
$279.99
- Excellent Pedaling Efficiency
- Optimized Balance Of Weight And Rigidity
- Injection Molded Carbon Composite Body
- Hollow Cleat Bolt
- Efficient Power Transfer
- High Stability
- Extra-Wide Platform
- Efficient Power Transfer/Durability
- Reduces Flex And Pedal Body Wear
- Stainless Steel Body Plate
- Excellent Pedaling Efficiency
- Smooth Rotation
- 2-Ball Bearing, 1-Wide Roller Bushing
- Reliable Durability Performance
- Stable And Uniform Load Distribution
- Wide Bearing Placement
- Rider Tune
- Customize The Entry And Release Tension Settings
- Adjustable Entry And Release Tension Settings
- Shimano 3-Year Limited Warranty
- Average Weight: 224g
- Shimano SPD-SL cleats included
- Standard (52mm)
- Wide (56mm)
$99.99
The EXPLORER PD-ES600 pedals are designed for rides requiring frequent engagement and disengagement, such as city touring. Light action springs allow for easy entry and exit, making the new rider feel more confident.
CLEAN APPEARANCE
- The PD-ES600 features a clean appearance body for use on lightweight road touring bikes.
EASY RIDER ADJUSTMENT
- Easy-to-adjust entry and release tension settings.
SYSTEM ENGINEERED TO WORK TOGETHER
- SHIMANO RT footwear is designed to match the PD-ES600.
$60.00
$80.00
25% Off
Get rad without getting broke. This Multi-Purpose Flat Pedal from Shimano has a wide platform and adjustable pin height to dial in the perfect amount of grip for your preference and riding conditions.
- 3 different pin height settings to match different type of riding
- 9 pins per platform
- Highest setting is+5 mm higher than PD-MX80's pins
- Weight: 533g
$49.99
Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability.
- 380 grams (pair)
$84.99
Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings.
- 352 grams (pair)
$149.99
PD-R7000 NEW
FEATURE
- Carbon fiber reinforced resin pedal body
- Wide contact area
- 265g/pr (25g/pr lighter than PD-5800)
BENEFIT
- Optimum power transfer
- Lightweight
- Aerodynamic image
- Color: CFRP
- Average weight: 265 g
- Road clearance: 31°
- Binding: Single Sided
- Cleat included: SM-SH11
- Optional cleat: SM-SH10 / SM-SH12
- Pedal Type: Road
- Reflector: SM-PD65
$199.99
Shimano Ultegra R8000 pedals.
- Pro-level performance and lightweight for the enthusiast
- The legacy of Shimano design, quality and performance
- Carbon-composite body
- Extra-wide platform for a more efficient transfer of power
- Adjustable entry and release tension settings
- 4mm longer axle available
- Low stack height
- 0.7mm lower than PD-6800
- Model Number: PD-R8000
- Series: Ultegra
- Pedal System: SPD-SL
- Average Weight: 248 grams
$179.99
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
$179.99
- Enhanced pedal-to-shoe contact area with mud-shedding profile
- Wide bearing placement for rigidity and uniform load distribution
- Slimmer, weight-optimized axle with 2 length options
- Low platform height for pedaling stability
- Lightweight, 310 g (11 oz.) per pair
- Slimmer axle housing better sheds mud and debris
- Binding Dual Sided
- Cartridge axle
- SM-SH51 Cleat included
- Cleat retention adjuster
- Offset binding
- Sealed mechanism
- Average weight: 310g (Short axle type)
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)
- 3 mm shorter axle version (52mm)
- 1.0 mm cleat spacer included
$59.99
Here For The Party
A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.
The Full Meal Deal
A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side.
Not Just Another Axle
Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up.
Bling For Your Bike
No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from.
Specs
- Platform Height: 18.4mm
- # of Pins: 16 SHCS hex traction pins per pedal (8 per side)
- Platform L x W: 101 x 110mm
- Axle Material: Chromoly Steel
- Body Material: Nylon Composite
- Material: Nylon Composite
- Weight: 360g
$59.00
Chester returns to the party with more grip, a second size option and a better ride feel, all with the same tough composite build at a price that any rider can get behind. With fully serviceable internals, eight colors and a Lifetime Warranty inclusive of crashes, you’ll be glad to have Chester along for the ride. Chester pedals provide the feel you want with the grip you need, at an exceptional value.
- Chromoly Steel axle
- Nylon Composite body
- 11 pins per side, including 9 metal and 2 co-molded plastic
- 16mm platform height
- Available in two size options
- Large: 115 x 110mm
$114.99
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Composite
- Spindle: Chromoly+
- Platform material: Stainless Steel
- Platform area: 500mm²
- Platform width: 50mm
- Q Factor: 53mm
- Stack height + cleats: 17.3mm (11 + 6.3mm)
- Weight (pedal): 130g
- Weight (pair + cleats): 328g
$99.99
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
Specs:
- Spindle material: Forged scm 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 355g per pair
- Warranty: 5 years
$135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel.
Specs:
Spindle material: Forged SCM 435 chromoly steel
Body material: Cast stainless steel
Wing material: 17-4PH stainless
Spring material: 300 series stainless steel
Release angle: 15° / 20°
Q-factor: 52mm
Inner bearing type: Igus LL-glide bearing
Outer bearing type: Enduro cartridge bearing
Cleat: Premium brass cleats with shims included
Weight: 280g per pair
Warranty: 5 years
$179.99
The ultimate pedal for enduro riding and racing, with a longer spindle.
- Concave platform for secure foothold
- 6 adjustable pins per side for grip
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 57mm q-factor for increased shoe clearance and control
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
- Adjustable Pins: 6 per side
- Body Material: 6061-T6 aluminum
- Cleats: Premium brass cleats with shims included
- Endcap: Hex alloy
- Inner Bearing Type: Igus LL-glide bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Enduro cartridge bearing
- Q-factor: 57mm
- Release Angle: 15° / 20°
- Spindle Material: Forged scm 435 chromoly steel
- Spring Material: 300 series stainless steel
- Warranty: 5 years
- Weight: 424g per pair
- Wing Material: 17-4PH stainless
$179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)
$279.99
Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs.
- Weight: 224g (per pedal pair)
- Spindle Material: Stainless Steel
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 39º
- Bearing: Sealed
$449.99
The Speedplay Nano is a featherweight, dual-sided road pedal that lives up to the demands of sprint finishes, categorized climbs, and tough training sessions. The mix of premium titanium and carbon fiber materials creates a lightweight but strong pedal that will hold up and deliver speed on the breakaway. The integrated cleat system with 3-axis adjustability allows you to precisely dial in your fit for optimized biometrics and increased power transfer.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimze fit and enhance performace through better biomechanics.
Designed with the same level of focus and dedication it takes to earn a spot on the podium, Nano is a purpose-built, ultralight pedal that utilizes the proven Speedplay platform to offer every advantage come race-day.
- Weight: 168g (per pedal pair)
- Spindle Material: Titanium
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$229.99
Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride.
- Weight: 220g (per pedal pair)
- Spindle Material: Stainless Steel
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
Page 1 of 3
Next page