Bikes & Accessories in Store TODAY!

"When all you need is a shield to block cold winter winds, there's Draugenklaw. The sleek, open design makes it easy to get your hands in and out for riding singletrack or commuting. Draugenklaw pogies are designed for simple, secure installation so you can put them on and take them off your bike as conditions change week to week. A reflective wrist cuff makes you more visible when riding after dark. -Provides basic wind coverage while wearing insulated gloves -Zippered handlebar closure with simple hook-and-loop strap -Bar-end plug attachment for secure installation and easy removal -Reflective accents for visibility -Rigid structure maintains shape for ease of hand entry and exit"

Flowbeist attacks groomed single track with confidence thanks to an ultra-aggressive tread that’s ready for whatever the trail throws at it. Designed for optimal use as a front tire, its wide 4.6” footprint floats well, rolls fast and is compatible with a wide range of frames and forks. Digging into berms brings the Flowbeist alive as its tall side lugs with softer compound rubber claw the snow. Hit the brakes on tight twisty single track and the aggressive tread design digs in to keep you and your bike in control. Pair Flowbeist with its sibling rear tire, Dunderbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a front tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Dunderbeist rear tire

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double, and triple-siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - 252 carbide aluminum studs - Directional lugs provide low rolling resistance while offering excellent braking traction - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Ragnarök Tall is the remedy for cool and wet conditions. Our shoulder-season performance shoe features a waterproof membrane and tall neoprene cuff to regulate moisture and keep out mud and grit. End uncomfortable rides with Ragnarök’s unrivaled weather protection. - A redesigned opening makes Ragnarök easy to put on and take off, and a floating three-finger overflap allows riders to dial in the perfect fit - Ragnarök’s real rubber outsole has an aggressive tread for walking in mud and features a 2-bolt cleat mount - Tall neoprene cuff keeps debris out - Easy on and off - Floating three-finger overflap allows the BOA laces to tighten where they need to for an optimal fit - Imported

- Inverted continuous center tread is formed by dimpled diamond design with narrow grooves between blocks to decrease rolling resistance and provide a smooth ride over hard surfaces - Diamond pattern becomes progressively larger and more aggressive as it approaches the sidewall - Larger side knobs produce better grip and traction when riding thru gravel, dirt, and snow

OtherSideLoader cages solve the problem of cramped space on Compact style road frames, as well as MTB applications. One Sideloader (sold separately) plus one OtherSideloader outfit a standard road frame. The shape matches Dave-O's perfectly. Other SideLoaders are for down tube mount, right side entry.

SideLoader cages solve the problem of cramped space on Compact style road frames, as well as MTB applications. One SideLoader plus one OtherSideloader (sold separately) outfits a standard road frame. The shape matches Dave-O's perfectly. SideLoaders are for seat tube mount, right side entry.

The name DTR tells you where it goes and what it does. DTR stands for Down Tube Right side entry. This side-loading design is a great match for our Mandible cage and was developed over a two-year period, including testing in MTB World Cup competition. - Weight: 25 grams

The name STR tells you where it goes and what it does. STR stands for Seat Tube Right side entry. This side-loading design is a great match for our Mandible cage and was developed over a two-year period, including testing in MTB World Cup competition. STR fitment is like our proven Sideloader.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.

The Banjo Brother's large "gas-tank" style top tube bag is the bag you've been looking for. 65 cubic inches (1.1L) of storage front and center of your bike's cockpit. 50% larger than the original Banjo Brothers Top Tube Bag, this bag will hold a lot of what you need. Maybe that's food, or wallet, keys and phone. With a rigid bottom and padded sides the bag holds its shape and the main compartment zipper and side zipper are easy to use one-handed. Banjo Brothers used the same weather-proof zipper system that they use on their frame packs. The Large Top Tube Bag also features reflective piping for added visibility. Cut-to-fit straps means the bag will work on virtually any frame. The bag itself is not waterproof, but the fabric is waterproof and the zippers are covered. For the money the bag provides protection to satisfy riding in real-world conditions. It can also be attached at the seat-post. - Weight: 6 oz - Dimensions: 7" L x 4" H x 2.5" W - Capacity: 65 cubic inches / 1.1 liters - Rigid bottom and padded sides - Weather-proof zippers - Large main compartment and side pocket - Cut-to-fit-straps - Reflective piping - Imported

Banjo Brothers' Handlebar bag is loaded with clever features. It's made from tough, water-resistant fabric with a flip-up clear map pouch plus plenty of interior and exterior pockets for organization. Stability is top notch thanks to its secure Velcro attachments, rigid interior support and secondary strap that attaches your fork's eyelets. It even fits suspension forks with an included alternate strap. Reflective accents all the way around give you visibility and you've got a clip for attaching a blinkie.

- Hinged 2 finger lever - Forged alloy construction - 2 piece hinged clamp - Compatible with caliper and U-brake applications - Fits 22.2mm (7/8") handlebars - 88g each

With its alloy/steel construction and 4-bolt clamp design, the MX is a trusty BMX quill stem. - Quill Length: 4-1/4-inches - Quill diameter: 21.1mm

Our Shimano M9100 Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought after Bi Directional narrow-wide tooth design provides excellent chain retention without a chain guide - Direct mount for Shimano M9100, M8100, and M7100 and perfect for 1x setups - Features a perfect 51mm to 55mm chainline, depending on axle length and spacer configuration - CNC'd in Canada from 7075 aluminum with laser-etched graphics

The adapter puck is required for mounting Garmin head units to the Pro Blendr Alloy Computer Mount. - Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount and Garmin Adapter Puck for secure mounting of your Garmin head unit. Blendr is an elegant, integrated accessory mounting solution - For use with Garmin head units and Pro Blendr Alloy Computer Mount - Removable design alloys quick and easy adapter puck replacement - Attach your Garmin tether for an additional layer of security

Light up the road Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. - Blendr is an elegant, integrated accessory mounting solution - Clip can be rotated for compatibility with many Bontrager accessories - Works with any Blendr-compatible stem and the accompanying base

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Original equipment replacement rear derailleur hangers. Get back on the road with a quality replacement hanger. Product details - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications - Mounting location: Rear drive side - Attachment: 1-bolt

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

A set of durable, SPD-compatible replacement cleats that come with all mounting hardware. Get that fresh cleat feel These solidly-built cleats work with any SPD-compatible pedals whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit. Product details - Compatible with all 2-bolt SPD-style pedals - Directly compatible with Bontrager Comp MTB and Commuter pedals - Includes mounting hardware - Float: 4-deg

The Fat Bike Tube is just that, a tube built specifically for fat bikes. Tailored sizes perfectly suit the line of Bontrager fat tire models. Product details - 0.9mm wall thickness - Equipped with removable valve cores - Purchase 50 tubes to receive a full case - 35mm Schrader valve