Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Sport/Performance

Cervelo Caledonia 105
$2,900.00
Caledonia is a bike for the way riders ride. It’s not a Grand Tour bike, where the skinniest of chubby tires rub the stays, and it’s not a gravel bike butting up against a 1989 MB-1. It’s a bike for the rides that kick off at the cafe, hammer up thoroughfares to get out of town, wind through chip-seal backroads, take that cutty dirt road that links up to the base of the mountain, and then scream downhill back toward home. Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with 'road ride'. As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. Removable FDM Our bolt-on front derailleur mount is made from high strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage and enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution. - Cervelo carbon frame and fork - Shimano 105 drivetrain - Shimano 105 flat mount hydraulic disc brakes - Vittoria Zaffiro Pro V 700c x 30 tires
Cervelo Caledonia Ultegra
$3,500.00
Caledonia is a bike for the way riders ride. It’s not a Grand Tour bike, where the skinniest of chubby tires rub the stays, and it’s not a gravel bike butting up against a 1989 MB-1. It’s a bike for the rides that kick off at the cafe, hammer up thoroughfares to get out of town, wind through chip-seal backroads, take that cutty dirt road that links up to the base of the mountain, and then scream downhill back toward home. Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with 'road ride'. As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. Removable FDM Our bolt-on front derailleur mount is made from high strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage and enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution. - Cervelo carbon frame and fork - Shimano Ultegra drivetrain - Shimano Ultegra flat mount hydraulic disc brakes - DT Swiss E1850 23 Spline wheels
Cervelo Caledonia Ultegra Di2
$4,500.00
Caledonia is a bike for the way riders ride. It’s not a Grand Tour bike, where the skinniest of chubby tires rub the stays, and it’s not a gravel bike butting up against a 1989 MB-1. It’s a bike for the rides that kick off at the cafe, hammer up thoroughfares to get out of town, wind through chip-seal backroads, take that cutty dirt road that links up to the base of the mountain, and then scream downhill back toward home. Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with 'road ride'. As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. Removable FDM Our bolt-on front derailleur mount is made from high strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage and enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution. - Cervelo carbon frame and fork - Shimano Ultegra Di2 drivetrain - Shimano Ultegra flat mount hydraulic disc brakes - DT Swiss E1850 23 Spline wheels
Cervelo R-Series Ultegra
$4,500.00
Those who live on a strict diet of road require a bike that can deliver the ultimate all-round ride. From cobbles to concrete, coasts to climbs, the R is engineered to provide maximum performance and rideability. As standard, the R is a pro-level machine. Raced in the Hell of the North by Team Sunweb, it proves that nothing we make is anything less than high performance. Light and stiff, it retains compliance where you need it for long days in the saddle. The geometry is designed for responsive and stable handling without sacrificing comfort. This is a bike you can trust, whether attacking out of the saddle or on the inside of a downhill corner. Elite Fit Our Elite Fit is based on extensive observations and analysis of riders' positions. It offers a wide range of positions for all athletes, from endurance riders to Pro-Tour racers, without compromising handling, comfort, or performance. Squoval Max Squoval Max tubes are part of a library of tube shapes that combine the attributes of a square with an oval but with a more aerodynamic leading edge. With these unique shapes, we dial-in the ideal balance of stiffness and weight in specific areas of a frame while reducing aerodynamic drag. BBright Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - R-Series full carbon frame and fork - Shimano Ultegra drivetrain - DT Swiss P1800 32 Spline wheels - Cervelo SP19 carbon seatpost
Cervelo S-Series Ultegra
$4,500.00
The S makes every part of every ride better, whether during the final sprint on your Saturday morning group ride or your solo interval efforts on the edge of town. We’ve applied years of experience building the most aero bikes in the peloton to create a bike that delivers maximum performance. When the UCI’s frame design rules changed we grasped the opportunity and pushed it to the limits. We made aerodynamic gains via a fully integrated cockpit for both mechanical and electronic builds. The S disc became a whopping 102 grams (13 watts) faster than its predecessor. With such huge gains being made at this highly competitive performance level, the S reflects our commitment to bringing tangible aero gains within reach of more riders. Elite Fit Our Elite Fit is based on extensive observations and analysis of riders' positions. It offers a wide range of positions for all athletes, from endurance riders to Pro-Tour racers, without compromising handling, comfort, or performance. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics without sacrificing usability or performance. Floating RDH Our two-part floating rear derailleur hanger is designed to allow for easy alignment of the rear dropouts, ensuring that the rear axle can be installed quickly and simply every time. This design also incorporates the rear derailleur hanger and comes in different versions (threaded, RAT-style), allowing you to easily update your frame and fork if standards change. BBright Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - S-Series full carbon frame and fork - Shimano Ultegra drivetrain - DT Swiss P1800 32 Spline wheels - Vittoria Rubino Pro TLR tires - Cervelo SP20 carbon seatpost
Cervelo Caledonia-5 Ultegra
$5,000.00
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - Shimano Ultegra drivetrain - Shimano Ultegra flat mount hydraulic disc brakes - DT Swiss E1800 32 Spline wheels
Cervelo R-Series Ultegra Di2
$6,000.00
Those who live on a strict diet of road require a bike that can deliver the ultimate all-round ride. From cobbles to concrete, coasts to climbs, the R is engineered to provide maximum performance and rideability. As standard, the R is a pro-level machine. Raced in the Hell of the North by Team Sunweb, it proves that nothing we make is anything less than high performance. Light and stiff, it retains compliance where you need it for long days in the saddle. The geometry is designed for responsive and stable handling without sacrificing comfort. This is a bike you can trust, whether attacking out of the saddle or on the inside of a downhill corner. Elite Fit Our Elite Fit is based on extensive observations and analysis of riders' positions. It offers a wide range of positions for all athletes, from endurance riders to Pro-Tour racers, without compromising handling, comfort, or performance. Squoval Max Squoval Max tubes are part of a library of tube shapes that combine the attributes of a square with an oval but with a more aerodynamic leading edge. With these unique shapes, we dial-in the ideal balance of stiffness and weight in specific areas of a frame while reducing aerodynamic drag. BBright Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - R-Series full carbon frame and fork - Shimano Ultegra Di2 drivetrain - Reserve 35mm carbon rims / DT370 hubs - Shimano Ultegra hydraulic disc brakes
Cervelo S-Series Ultegra Di2
$6,000.00
The S makes every part of every ride better, whether during the final sprint on your Saturday morning group ride or your solo interval efforts on the edge of town. We’ve applied years of experience building the most aero bikes in the peloton to create a bike that delivers maximum performance. When the UCI’s frame design rules changed we grasped the opportunity and pushed it to the limits. We made aerodynamic gains via a fully integrated cockpit for both mechanical and electronic builds. The S disc became a whopping 102 grams (13 watts) faster than its predecessor. With such huge gains being made at this highly competitive performance level, the S reflects our commitment to bringing tangible aero gains within reach of more riders. Elite Fit Our Elite Fit is based on extensive observations and analysis of riders' positions. It offers a wide range of positions for all athletes, from endurance riders to Pro-Tour racers, without compromising handling, comfort, or performance. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics without sacrificing usability or performance. Floating RDH Our two-part floating rear derailleur hanger is designed to allow for easy alignment of the rear dropouts, ensuring that the rear axle can be installed quickly and simply every time. This design also incorporates the rear derailleur hanger and comes in different versions (threaded, RAT-style), allowing you to easily update your frame and fork if standards change. BBright Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - S-Series full carbon frame and fork - Shimano Ultegra Di2 drivetrain - Reserve 50mm carbon rims / DT370 hubs - Cervelo carbon bars and seatpost
Cervelo S3 Disc eTAP
$6,250.00 $8,200.00 24% Off
A workhorse unleashed The S3 Disc is stiffer and more aerodynamic than its rim-brake counterpart, while continuing to make the most of the lightweight design rooted in Cervelo's Project California research facility. All of this translates to superior handling and control, giving you the confidence to pull away from the peloton or put the hurt on a Saturday morning group ride. Built on an ultra-lightweight Cervelo carbon frame, the S3 Disc features effortless SRAM RED eTap electronic shifting, powerful SRAM RED hydraulic disc brakes, ENVE SES 5.6 wheelset, Cervelo Carbon Aero seatpost and handlebar, and a supportive Fizik Antares saddle. Stiffer, better-riding, aero as ever. All with zero weight penalty. Features: - BBright: This asymmetrical 79mm bottom bracket standard yields stiffer and lighter frames and crank systems - Carbon dropouts: Tough, compression molded dropouts save weight with no sacrifice in strength compared to traditional metal dropouts - Future-proof cable management: Ensures your frame is compatible with all current and future derailleur and brake systems - Partial seat tube cutout: A close-fitting curve in the seat tube's trailing edge improves aerodynamics by partially shielding the leading edge and top of the rear wheel - Reduced-friction BB guide: Significantly reduces cable friction in the bottom bracket, which means smoother shifting, easier setup and longer service intervals
Cervelo Caledonia-5 Ultegra Di2
$6,500.00
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - Shimano Ultegra Di2 drivetrain - Reserve 35mm carbon rims/DT370 hubs - Prologo Dimension TiRox saddle
Cervelo Caledonia-5 Force eTap AXS
$7,000.00
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - SRAM Force eTap AXS drivetrain w/power meter - Reserve 35mm carbon rims/DT370 hubs - Cervelo carbon handlebars and seatpost
Cervelo R5 Disc Force eTap AXS
$7,000.00
The R5 is engineered to help you achieve glory—whatever that is for you. World Tour riders praise its unrivaled stiffness, light weight, and stable handling. This bike isn’t only for the pros, though—the ultimate all-around ride experience is here for you. The R5 sits at the top of the road category with a frame fine-tuned for greater speed. Our Pro Fit geometry offers a more aerodynamic position and prioritizes stability and handling at even higher velocities. It’s a reference for stiffness and weight in this category yet retains the ride quality you need to stay fresh on the biggest of days. Squoval Max Squoval Max tubes are part of a library of tube shapes that combine the attributes of a square with an oval but with a more aerodynamic leading edge. With these unique shapes, we dial in the ideal balance of stiffness and weight in specific areas of a frame, while reducing aerodynamic drag. Pro Fit Cervelo’s Pro Fit offers our lowest frame stack heights to enable an aerodynamic riding position. The Pro Fit is the direct result of input from our pro racers who wanted to get their handlebars as low as possible for maximum aerodynamic advantage. BBRight Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - R5 full carbon frame and fork - SRAM Force eTap AXS drivetrain - Reserve 50mm carbon rims / DT370 hubs - Cervelo carbon cockpit - SRAM Force HRD brakes
Cervelo R5 Disc Ultegra Di2
$7,000.00
The R5 is engineered to help you achieve glory—whatever that is for you. World Tour riders praise its unrivaled stiffness, light weight, and stable handling. This bike isn’t only for the pros, though—the ultimate all-around ride experience is here for you. The R5 sits at the top of the road category with a frame fine-tuned for greater speed. Our Pro Fit geometry offers a more aerodynamic position and prioritizes stability and handling at even higher velocities. It’s a reference for stiffness and weight in this category yet retains the ride quality you need to stay fresh on the biggest of days. Squoval Max Squoval Max tubes are part of a library of tube shapes that combine the attributes of a square with an oval but with a more aerodynamic leading edge. With these unique shapes, we dial in the ideal balance of stiffness and weight in specific areas of a frame, while reducing aerodynamic drag. Pro Fit Cervelo’s Pro Fit offers our lowest frame stack heights to enable an aerodynamic riding position. The Pro Fit is the direct result of input from our pro racers who wanted to get their handlebars as low as possible for maximum aerodynamic advantage. BBRight Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - R5 full carbon frame and fork - Shimano Ultegra Di2 drivetrain - Reserve 50mm carbon rims / DT350 hubs - Cervelo carbon cockpit
Cervelo S5 Ultegra
$7,000.00
The S makes every part of every ride better, whether during the final sprint on your Saturday morning group ride or your solo interval efforts on the edge of town. We’ve applied years of experience building the most aero bikes in the peloton to create a bike that delivers maximum performance. When the UCI’s frame design rules changed we grasped the opportunity and pushed it to the limits. We made aerodynamic gains via a fully integrated cockpit for both mechanical and electronic builds. The S disc became a whopping 102 grams (13 watts) faster than its predecessor. With such huge gains being made at this highly competitive performance level, the S reflects our commitment to bringing tangible aero gains within reach of more riders. Elite Fit Our Elite Fit is based on extensive observations and analysis of riders' positions. It offers a wide range of positions for all athletes, from endurance riders to Pro-Tour racers, without compromising handling, comfort, or performance. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics without sacrificing usability or performance. Floating RDH Our two-part floating rear derailleur hanger is designed to allow for easy alignment of the rear dropouts, ensuring that the rear axle can be installed quickly and simply every time. This design also incorporates the rear derailleur hanger and comes in different versions (threaded, RAT-style), allowing you to easily update your frame and fork if standards change. BBright Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - S5 full carbon frame and fork - Shimano Ultegra drivetrain - Reserve 50mm carbon rims / DT370 hubs - Cervelo carbon cockpit
Cervelo S5 Force eTap AXS
$8,500.00
The S makes every part of every ride better, whether during the final sprint on your Saturday morning group ride or your solo interval efforts on the edge of town. We’ve applied years of experience building the most aero bikes in the peloton to create a bike that delivers maximum performance. When the UCI’s frame design rules changed we grasped the opportunity and pushed it to the limits. We made aerodynamic gains via a fully integrated cockpit for both mechanical and electronic builds. The S disc became a whopping 102 grams (13 watts) faster than its predecessor. With such huge gains being made at this highly competitive performance level, the S reflects our commitment to bringing tangible aero gains within reach of more riders. Elite Fit Our Elite Fit is based on extensive observations and analysis of riders' positions. It offers a wide range of positions for all athletes, from endurance riders to Pro-Tour racers, without compromising handling, comfort, or performance. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics without sacrificing usability or performance. Floating RDH Our two-part floating rear derailleur hanger is designed to allow for easy alignment of the rear dropouts, ensuring that the rear axle can be installed quickly and simply every time. This design also incorporates the rear derailleur hanger and comes in different versions (threaded, RAT-style), allowing you to easily update your frame and fork if standards change. BBright Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - S5 full carbon frame and fork - SRAM Force eTap AXS drivetrain w/power meter - Reserve 50mm carbon rims / DT350 hubs - Ceramic Speed bottom bracket
Cervelo S5 Ultegra Di2
$8,500.00
The S makes every part of every ride better, whether during the final sprint on your Saturday morning group ride or your solo interval efforts on the edge of town. We’ve applied years of experience building the most aero bikes in the peloton to create a bike that delivers maximum performance. When the UCI’s frame design rules changed we grasped the opportunity and pushed it to the limits. We made aerodynamic gains via a fully integrated cockpit for both mechanical and electronic builds. The S disc became a whopping 102 grams (13 watts) faster than its predecessor. With such huge gains being made at this highly competitive performance level, the S reflects our commitment to bringing tangible aero gains within reach of more riders. Elite Fit Our Elite Fit is based on extensive observations and analysis of riders' positions. It offers a wide range of positions for all athletes, from endurance riders to Pro-Tour racers, without compromising handling, comfort, or performance. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics without sacrificing usability or performance. Floating RDH Our two-part floating rear derailleur hanger is designed to allow for easy alignment of the rear dropouts, ensuring that the rear axle can be installed quickly and simply every time. This design also incorporates the rear derailleur hanger and comes in different versions (threaded, RAT-style), allowing you to easily update your frame and fork if standards change. BBright Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - S5 full carbon frame and fork - Shimano Ultegra Di2 drivetrain - 4iiii Precision dual-sided power meter - Reserve 50mm carbon rims / DT350 hubs - Ceramic Speed bottom bracket
Cervelo R5 Disc Dura Ace Di2
$9,500.00
The R5 is engineered to help you achieve glory—whatever that is for you. World Tour riders praise its unrivaled stiffness, light weight, and stable handling. This bike isn’t only for the pros, though—the ultimate all-around ride experience is here for you. The R5 sits at the top of the road category with a frame fine-tuned for greater speed. Our Pro Fit geometry offers a more aerodynamic position and prioritizes stability and handling at even higher velocities. It’s a reference for stiffness and weight in this category yet retains the ride quality you need to stay fresh on the biggest of days. Squoval Max Squoval Max tubes are part of a library of tube shapes that combine the attributes of a square with an oval but with a more aerodynamic leading edge. With these unique shapes, we dial in the ideal balance of stiffness and weight in specific areas of a frame, while reducing aerodynamic drag. Pro Fit Cervelo’s Pro Fit offers our lowest frame stack heights to enable an aerodynamic riding position. The Pro Fit is the direct result of input from our pro racers who wanted to get their handlebars as low as possible for maximum aerodynamic advantage. BBRight Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - R5 full carbon frame and fork - Shimano Dura-Ace Di2 drivetrain - Reserve 50mm carbon rims / DT350 hubs - Cervelo carbon cockpit - Shimano Dura-Ace hydraulic disc brakes
Cervelo R5 Disc RED eTap AXS
$9,500.00
The R5 is engineered to help you achieve glory—whatever that is for you. World Tour riders praise its unrivaled stiffness, light weight, and stable handling. This bike isn’t only for the pros, though—the ultimate all-around ride experience is here for you. The R5 sits at the top of the road category with a frame fine-tuned for greater speed. Our Pro Fit geometry offers a more aerodynamic position and prioritizes stability and handling at even higher velocities. It’s a reference for stiffness and weight in this category yet retains the ride quality you need to stay fresh on the biggest of days. Squoval Max Squoval Max tubes are part of a library of tube shapes that combine the attributes of a square with an oval but with a more aerodynamic leading edge. With these unique shapes, we dial in the ideal balance of stiffness and weight in specific areas of a frame, while reducing aerodynamic drag. Pro Fit Cervelo’s Pro Fit offers our lowest frame stack heights to enable an aerodynamic riding position. The Pro Fit is the direct result of input from our pro racers who wanted to get their handlebars as low as possible for maximum aerodynamic advantage. BBRight Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - R5 full carbon frame and fork - SRAM RED eTap AXS drivetrain - Reserve 50mm carbon rims / DT350 hubs - Cervelo carbon cockpit - SRAM RED HRD brakes
Cervelo Caledonia-5 Red eTap AXS
$10,000.00
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - SRAM RED eTap AXS drivetrain w/power meter - Zipp 303 wheels - Cervelo carbon cockpit - Ceramic Speed bottom bracket
Cervelo Caledonia-5 Dura Ace Di2
$11,000.00
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - Shimano Dura-Ace Di2 drivetrain - 4iiii Precision dual-sided power meter - ENVE SES 3.4 AR Disc wheels - Cervelo carbon cockpit - Ceramic Speed bottom bracket
Cervelo S5 Dura Ace Di2
$11,500.00
The S makes every part of every ride better, whether during the final sprint on your Saturday morning group ride or your solo interval efforts on the edge of town. We’ve applied years of experience building the most aero bikes in the peloton to create a bike that delivers maximum performance. When the UCI’s frame design rules changed we grasped the opportunity and pushed it to the limits. We made aerodynamic gains via a fully integrated cockpit for both mechanical and electronic builds. The S disc became a whopping 102 grams (13 watts) faster than its predecessor. With such huge gains being made at this highly competitive performance level, the S reflects our commitment to bringing tangible aero gains within reach of more riders. Elite Fit Our Elite Fit is based on extensive observations and analysis of riders' positions. It offers a wide range of positions for all athletes, from endurance riders to Pro-Tour racers, without compromising handling, comfort, or performance. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics without sacrificing usability or performance. Floating RDH Our two-part floating rear derailleur hanger is designed to allow for easy alignment of the rear dropouts, ensuring that the rear axle can be installed quickly and simply every time. This design also incorporates the rear derailleur hanger and comes in different versions (threaded, RAT-style), allowing you to easily update your frame and fork if standards change. BBright Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - S5 full carbon frame and fork - Shimano Dura-Ace Di2 drivetrain - 4iiii Precision dual-sided power meter - ENVE SES 5.6 Disc wheels
Cervelo S5 RED eTap AXS
$11,500.00
The S makes every part of every ride better, whether during the final sprint on your Saturday morning group ride or your solo interval efforts on the edge of town. We’ve applied years of experience building the most aero bikes in the peloton to create a bike that delivers maximum performance. When the UCI’s frame design rules changed we grasped the opportunity and pushed it to the limits. We made aerodynamic gains via a fully integrated cockpit for both mechanical and electronic builds. The S disc became a whopping 102 grams (13 watts) faster than its predecessor. With such huge gains being made at this highly competitive performance level, the S reflects our commitment to bringing tangible aero gains within reach of more riders. Elite Fit Our Elite Fit is based on extensive observations and analysis of riders' positions. It offers a wide range of positions for all athletes, from endurance riders to Pro-Tour racers, without compromising handling, comfort, or performance. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics without sacrificing usability or performance. Floating RDH Our two-part floating rear derailleur hanger is designed to allow for easy alignment of the rear dropouts, ensuring that the rear axle can be installed quickly and simply every time. This design also incorporates the rear derailleur hanger and comes in different versions (threaded, RAT-style), allowing you to easily update your frame and fork if standards change. BBright Cervelo developed BBright to take advantage of the fact that oversized frame tubes are stiffer and lighter. With the BBright system, larger-sized tubes are used in the seat tube, down tube, and left-hand chainstay. The benefit is increased stiffness and pedaling efficiency in a lighter weight frame. BBright is compatible with all major crank standards. - S5 full carbon frame and fork - SRAM RED eTap AXS drivetrain w/power meter - Reserve 50/65mm carbon rims / DT180 hubs - SRAM RED HRD brakes
Giant Contend 3
$775.00
Smooth, fast, and fun. This versatile aluminum road bike has been revamped to give it a well-rounded performance ride quality. It’s the perfect choice to help you push the pace, ride more miles, and expand your road riding experience. Designed for aspiring riders aiming to ride a little faster and go a little farther, Contend offers a smooth, efficient ride quality and a quick, agile feel on the road. The innovative D-Fuse seatpost helps reduce road shocks and vibrations, and there’s enough frame and fork clearance to run wider tires (up to 32mm) to further smooth out the ride. Engineered and built in Giant’s industry-leading aluminum forging facility, it’s a true all-rounder for ambitious road riders. - Balanced road geometry: Frame is specifically engineered to produce a balanced, all-rounder feel that blends confident rider positioning with agile cornering and acceleration. - Smooth ride quality: Innovative D-Fuse seatpost design reduces road shocks and vibrations, and a Giant WheelSystem lets you run tubeless tires up to 32c for smoother ride quality and reduced risk of flats. - Total control: Seamless disc-brake integration including flat mounts and 12mm front and rear thru-axles produces more consistent braking power for better control, even in wet weather and rough roads.
Giant Contend AR 4
$980.00
Expand your idea of road riding and unlock new possibilities with this versatile all-rounder. With its balanced, smooth riding frame and components, powerful disc brakes and high-volume tubeless tires, Contend AR goes from fast pavement to bumpy backroads with confidence and control. Designed and developed for aspiring riders looking to elevate their road riding capabilities, Contend AR combines a smooth, responsive ride quality with an ability to handle adventurous new routes. Its disc-brake integration and generous tire clearance (up to 38mm) put you in control, even on rough roads. Its D-Fuse composite seatpost dampens road vibrations, giving you a smoother, more enjoyable ride experience and minimizing fatigue. This is a true all-rounder for those road riders who have a thirst for adventure. Balanced road geometry - Frame is specifically engineered to produce a balanced, all-rounder feel that blends confident rider positioning with agile cornering and acceleration. Smooth ride quality - Innovative D-Fuse seatpost design reduces road shocks and vibrations, and a Giant WheelSystem lets you run tubeless tires up to 38mm for a smoother ride quality and reduced risk of flats. Total control - Seamless disc brake integration including flat mounts and 12mm front and rear thru-axles produces more consistent braking power for better control, even in wet weather and rough roads. - Frame: ALUXX-Grade Aluminum, disc - Fork: Advanced-Grade Composite, full-composite OverDrive steerer, disc - Wheels: Giant S-R2 Disc wheelset - Shifters: Shimano Claris - Crankset: FSA Tempo, 34/50
Giant Contend AR 3
$1,250.00
Expand your idea of road riding and unlock new possibilities with this versatile all-rounder. With its balanced, smooth riding frame and components, powerful disc brakes and high-volume tubeless tires, Contend AR goes from fast pavement to bumpy backroads with confidence and control. Designed and developed for aspiring riders looking to elevate their road riding capabilities, Contend AR combines a smooth, responsive ride quality with an ability to handle adventurous new routes. Its disc-brake integration and generous tire clearance (up to 38mm) put you in control, even on rough roads. Its D-Fuse composite seatpost dampens road vibrations, giving you a smoother, more enjoyable ride experience and minimizing fatigue. This is a true all-rounder for those road riders who have a thirst for adventure. Balanced road geometry - Frame is specifically engineered to produce a balanced, all-rounder feel that blends confident rider positioning with agile cornering and acceleration. Smooth ride quality - Innovative D-Fuse seatpost design reduces road shocks and vibrations, and a Giant WheelSystem lets you run tubeless tires up to 38mm for a smoother ride quality and reduced risk of flats. Total control - Seamless disc brake integration including flat mounts and 12mm front and rear thru-axles produces more consistent braking power for better control, even in wet weather and rough roads. - Frame: ALUXX-Grade Aluminum, disc - Fork: Advanced-Grade Composite, full-composite OverDrive steerer, disc - Wheels: Giant S-R2 Disc wheelset - Shifters: Shimano Sora - Crankset: Shimano Sora, 34/50
Giant Contend AR 1
$1,750.00
Expand your idea of road riding and unlock new possibilities with this versatile all-rounder. With its balanced, smooth riding frame and components, powerful disc brakes and high-volume tubeless tires, Contend AR goes from fast pavement to bumpy backroads with confidence and control. Designed and developed for aspiring riders looking to elevate their road riding capabilities, Contend AR combines a smooth, responsive ride quality with an ability to handle adventurous new routes. Its disc-brake integration and generous tire clearance (up to 38mm) put you in control, even on rough roads. Its D-Fuse composite seatpost dampens road vibrations, giving you a smoother, more enjoyable ride experience and minimizing fatigue. This is a true all-rounder for those road riders who have a thirst for adventure. Balanced road geometry - Frame is specifically engineered to produce a balanced, all-rounder feel that blends confident rider positioning with agile cornering and acceleration. Smooth ride quality - Innovative D-Fuse seatpost design reduces road shocks and vibrations, and a Giant WheelSystem lets you run tubeless tires up to 38mm for a smoother ride quality and reduced risk of flats. Total control - Seamless disc brake integration including flat mounts and 12mm front and rear thru-axles produces more consistent braking power for better control, even in wet weather and rough roads. - Frame: ALUXX-Grade Aluminum, disc - Fork: Advanced-Grade Composite, full-composite OverDrive steerer, disc - Wheels: Giant P-R2 Disc wheelset - Shifters: Shimano 105 - Crankset: Praxis Alba 2D, 34/50
Giant Defy Advanced 2
$2,600.00
Choose the longer route. Climb higher mountains. This smooth-riding endurance road bike is purpose-built to help you tackle long-distance road rides on all types of roads. Handcrafted with Advanced-grade composite material, the Defy Advanced is engineered with tube shapes that are optimized to absorb road shocks and vibrations. Even with its smooth ride quality, it still delivers a lightweight, stiff, and lively feel when you’re climbing, accelerating, and cornering. It’s made with a specific carbon layup to give it an efficient, high-performance ride quality that helps you push new limits of endurance. The D-Fuse seatpost and handlebar system also help reduce road vibrations, adding to its smooth, compliant feel on the road. A tubeless Giant WheelSystem and tires boost speed and efficiency with a reduced risk of flats. And for added control, it features integrated disc brakes with flat-mount disc brake tabs and 12mm thru-axles. - Engineered compliance: Advanced Composite frame is specifically engineered for endurance road riding, delivering a smoother ride quality and less fatigue on long rides. The D-Fuse seatpost and handlebar system work seamlessly with the frame to absorb road shocks and vibrations. - Total control: Seamless disc-brake integration including flat mounts and 12mm front and rear thru-axles produces more consistent braking power for better control, even in wet weather and rough roads. - Versatility: Endurance road geometry, added tire clearance (up to 35mm) and disc-brake integration allow you to tackle a variety of roads and conditions, from smooth pavement to rugged backroads and mountain passes.
Giant Defy Advanced 1
$3,300.00
Choose the longer route. Climb higher mountains. This smooth-riding endurance road bike is purpose-built to help you tackle long-distance road rides on all types of roads. Handcrafted with Advanced-grade composite material, the Defy Advanced is engineered with tube shapes that are optimized to absorb road shocks and vibrations. Even with its smooth ride quality, it still delivers a lightweight, stiff, and lively feel when you’re climbing, accelerating, and cornering. It’s made with a specific carbon layup to give it an efficient, high-performance ride quality that helps you push new limits of endurance. The D-Fuse seatpost and handlebar system also help reduce road vibrations, adding to its smooth, compliant feel on the road. A tubeless Giant WheelSystem and tires boost speed and efficiency with a reduced risk of flats. And for added control, it features integrated disc brakes with flat-mount disc brake tabs and 12mm thru-axles. - Engineered compliance: Advanced Composite frame is specifically engineered for endurance road riding, delivering a smoother ride quality and less fatigue on long rides. The D-Fuse seatpost and handlebar system work seamlessly with the frame to absorb road shocks and vibrations. - Total control: Seamless disc-brake integration including flat mounts and 12mm front and rear thru-axles produces more consistent braking power for better control, even in wet weather and rough roads. - Versatility: Endurance road geometry, added tire clearance (up to 35mm) and disc-brake integration allow you to tackle a variety of roads and conditions, from smooth pavement to rugged backroads and mountain passes.
Giant Defy Advanced Pro 2
$4,300.00
Go longer, go faster, and smooth out rough roads with a frameset and integrated components that are engineered for compliance. From gran fondos to epic solo rides, this lightweight composite bike is everything you need for your most challenging days. With the perfect blend of stiffness and compliance, Defy Advanced Pro delivers a smooth, fast ride quality even on rough roads. Its innovative technologies include a D-Fuse composite seatpost and Contact SLR D-Fuse composite handlebar. These integrated cockpit components work as a system to add compliance and reduce road shocks and vibrations. The Advanced-grade composite frame is also integrated for disc brakes, with flat-mount disc brake tabs and 12mm front and rear thru-axles, plus clearance for high-volume tires up to 35mm. The oversized and tapered OverDrive 2 steerer tube boosts cornering precision, while the MegaDrive downtube and PowerCore bottom bracket deliver precise handling and class-leading pedaling efficiency. - Engineered compliance: Advanced Composite frame is specifically engineered for endurance road riding, delivering a smoother ride quality and less fatigue on long rides. The D-Fuse seatpost and handlebar system work seamlessly with the frame to absorb road shocks and vibrations. - Total control: Seamless disc-brake integration including flat mounts and 12mm front and rear thru-axles produces more consistent braking power for better control, even in wet weather and rough roads. - Versatility: Endurance road geometry, added tire clearance (up to 35mm) and disc-brake integration allow you to tackle a variety of roads and conditions, from smooth pavement to rugged backroads and mountain passes.
Giant Propel Advanced 1 Disc
$4,700.00
On the attack, in a sprint, or cornering at speed. Efficiency meets total control in this wind-slicing missile. Engineered with AeroSystem Shaping technology, an integrated WheelSystem, and disc brakes that are both powerful and aerodynamic, it gets up to speed and stays there with minimal resistance. This aero road bike minimizes drag so you can accelerate and sprint faster. Engineered with AeroSystem Shaping technology and Advanced-grade composite material, it delivers proven aero performance and one of the lightest frames in its category. The Propel Advanced Disc also comes with an integrated WheelSystem, flat-mount disc-brake calipers and thru-axles for added wheel stiffness and streamlined performance. The lightweight, easily adjustable Vector composite seatpost further minimizes drag. It all adds up to a race-ready machine that leaves the competition behind. Integrated aerodynamics - AeroSystem Shaping, a result of CFD analysis and dynamic wind-tunnel testing, optimizes aerodynamic performance at every yaw angle. The truncated ellipse airfoil tube shapes and Contact SL Aero cockpit help produce the best overall aero performance. Total control - Integrated disc brakes deliver powerful stopping power and modulation for added control in variable weather. Thru-axles boost stiffness and improve overall handling, and an integrated WheelSystem with a 65mm rear rim and shallower 42mm front rim optimizes aerodynamics and control. Unrivaled efficiency - Advanced-grade composite frameset features high-performance materials and modern manufacturing processes for optimized stiffness and the lowest weight in its category.
Page 1 of 4 Next page