Lubes/Cleaners

$18.95
Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions, wet and dry
- Also works on other places of your bike, including hubs, cables, and jockey wheels

$9.99
- For hydraulic braking systems
- Non-corrosive mineral oil
- Excellent heat managment properties
- Volumes : 50ml or 1000ml

$28.95
Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound.
Notice: Must be used on all component, fastener and carbon fiber surfaces in conjunction with threadlockers and retaining compounds that contact carbon fiber such as PF30 bottom brackets or brackets or bearings pressed into carbon fiber frames. Failure to do so could result in permanently bonded parts.

$9.95
Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.

$16.95
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts.
Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush.
16-ounce bottle

$39.95
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings.
The Chain Gang includes:
- CM-5.3 Cyclone Chain Scrubber
- GSC-1 GearClean Brush
- 8 oz. bottle of Bio ChainBrite
The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

$16.95
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.

$19.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

$7.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

$16.95
Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc.
Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

$12.95
Park's SuperGrip Carbon Assembly Compound is a combination of grease and tiny particles and is ideal for lubricating, protecting and tightening carbon components, like seatposts, handlebars and stems. SuperGrip solves the problem of carbon parts moving and slipping, which can happen if they are not lubed, or you apply standard grease or lube to them. It also works well with aluminum and steel components.

$9.95
Keep your chain running smoothly with Park's Synthetic-Blend Chain Lube. It uses PTFE and a proprietary blend of oils to penetrate, reduce friction, prolong chain life, displace moisture and protect chains from rust and corrosion. Plus, it works great on cables, spokes, and derailleur and brake pivots, too.

$16.95
Threadlockers lock threaded assemblies and keep them from loosening.
Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

$15.99
- PLUSH Suspension Oil
- Formulated specifically for mountain bike suspensions
- Designed for use in both forks and shocks
- Reduces stiction and running friction
- Consistent damping performance at any temperature
- Proprietary additive system minimizes oxidation, corrosion and wear
- Designed to protect seals and extend time between rebuilds

$9.99 - $12.99
Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!

$8.99
Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts.
- Engineered to rapidly clean disc brake rotors and pads
- Acetone-free formula

$19.99 - $29.99
Finish Line's Mineral Brake Fluid is formulated specifically for bicycle brake systems requiring mineral oil. Features no compromise leading edge chemistry to provide superior fluid life and braking performance.
Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures. Finish Line Mineral Brake Fluid was specifically engineered for use in bicycle hydraulic disc brake systems.
When you are serious about getting the most out of your braking system, Finish Line Mineral Brake Fluid is a great choice.
- Specifically engineered for use in bicycle hydraulic disc brakes
- Provides maximum fluid life and braking performance, even at low temperatures
- Prevents foaming and overheating

$7.99
Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too.
- Optimizes performance and efficiency of bottom brackets, hubs and headset bearings
- Use on stems, seat posts, cables and any threaded assemblies
- Prevents rusting even when exposed to salt water
- Clear and non-staining

$6.99 - $11.99
For a clean, smooth-pedaling drivetrain, look no further than Finish Line's Ceramic Wax Lubricant. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals for maximum durability and convenience. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!
- With each application the ceramic coating is enhanced, ultimately providing the durability of many oil-based lubricants
- No wetness or stickiness so dirt and grime will not be attracted or absorbed by the lubricant
- Helps avoid abrasive wear allowing parts to run more smoothly and last longer
- As the white ceramic particles embed themselves on the chain they will displace grime, causing a grey or black film to form on top of the wax coating. Over 2-3 applications this will lessen or cease. This discoloration is normal and will not compromise performance.

$6.99
Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

$11.99
Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

$9.99
Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.

$14.99
Reach for Finish Line's Citrus Degreaser when you've got tough grit and grime to cut through. Your parts clean up fast and then rinse residue-free with water. This degreaser is concentrated and water soluble so you can dilute it with up to 25 parts water for less difficult jobs. It's 100% biodegradable and completely non-toxic, too.

$8.99
Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

$5.99 - $11.99
- The industry standard dry lubricant, now formulated with nano-ceramic boron nitride, a flouro-free non-stick ceramic technology
- Finish Line Dry Lube goes on wet and sets up with a dry 'wax-like' synthetic film that helps keep your chain clean by not absorbing excessive amounts grit, grime, or dust
- Recommended for riding on or off-road in dry, dirty, dusty environments, yet still holds up well in moderately wet conditions
- Dry Lube can also be used on derailleurs, shifters, cables, and brake pivot points

$14.99
Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable.
- Great for dry, dirty and dusty environments. Attracts less grime and runs clean
- Holds up well in moderately wet conditions
- Can be used on derailleurs, shifters, cables and brake pivot points
- Finish Line's most popular and versatile lubricant

$7.99
E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

$11.99
E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

$9.99 - $13.99
- A biodegradable degreaser that cuts through the toughest grime
- Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces
- Exceeds all federal V.O.C. and California carbon regulations
- Law prohibits ORM-D materials from shipping by air

$7.99 - $34.95
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
Page 1 of 3
Next page